ICON Health & Fitness NordicTrack EXP10i User Manual page 11

8. Do not pinch the wires during this step.
Press the Console Cover (96) onto the back of
the console assembly (E) until all four corners
snap into place. Note: It may be helpful to care-
fully hit the corners of the Console Cover with the
heel of your hand.
9. Raise the Frame (57) to the position shown.
IMPORTANT: Have a second person hold the
Frame until step 11 is completed.
Remove the two 5/16" x 3/4" Screws (8) from the
Latch Crossbar (53). Note: The Latch Crossbar
is not preattached to the treadmill.
Next, orient the Latch Crossbar (53) as shown.
Make sure that the "This side toward belt"
sticker (I) is facing the treadmill. Attach the
Latch Crossbar to the brackets (J) on the Frame
(57) with the two 5/16" x 3/4" Screws (8) that you
just removed and two 5/16" Star Washers (7).
8
E
9
J
7
8
57
11
96
I
53
J
7
8