ICON Health & Fitness NordicTrack EXP10i User Manual page 10

6. Identify the Right Handrail Cover (75). Insert
the front edge of the Right Handrail Cover into
the top of the handrail assembly (D) as shown.
Then, press down on the top of the Right
Handrail Cover until it snaps into place.
Attach the Left Handrail Cover (74) to the
handrail assembly (D) in the same way.
7. Do not pinch the wires (F, G, H, 83, 98) dur-
ing this step. Attach the console assembly (E)
to the handrail assembly (D) with four 5/16" x
1" Screws (7) and four 5/16" Star Washers (4);
start all four Screws, and then tighten them.
Next, connect the Handrail Wire (83) and the
primary console wire (F) to the matching console
wires (G). IMPORTANT: The wire connectors
should slide together easily and snap into
place with an audible click. If they do not,
turn one connector and try again.
Then, connect the two Ground Wires (98, H).
6
74
7
98
7
4
H
F
83
10
D
75
E
G
7
4
D