Advertisement

Quick Links

www.nordictrack.com
Model No. NTL19007.6
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
1-888-825-2588
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NordicTrack ELITE 7500 and is the answer not in the manual?

Questions and answers

Summary of Contents for ICON Health & Fitness NordicTrack ELITE 7500

  • Page 1 www.nordictrack.com USER'S MANUAL Model No. NTL19007.6 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS .
  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
  • Page 4 21. Do not attempt to raise, lower, or move the Do not operate the television in temperatures treadmill until it is properly assembled. (See below 23° F (-5° C) or above 90° F (35° C). ASSEMBLY on page 7, and HOW TO FOLD 29.
  • Page 5 33. Upon completion of any service or repairs to • Use a jumper wire not smaller than No. 6 the treadmill or the television, ask the service AWG (13.3 mm ) copper, or the equivalent technician to perform safety checks to con- when a separate antenna-grounding elec- firm that the unit is in proper operating condi- trode is used.
  • Page 6: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the revolutionary NordicTrack ing this manual, please see the front cover of this man- ® ELITE 7500 treadmill. The ELITE 7500 treadmill offers ual. To help us assist you, note the product model an impressive selection of features designed to make number and serial number before contacting us.
  • Page 7: Assembly

    ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
  • Page 8 2. Identify the Right Upright (74) and the Left Upright (73). Hold the Right Upright near the Right Base Cover (77). See the inset drawing. Locate the wire tie in the rectangular hole in the lower end of the Right Upright. Tie the wire tie securely around the end of the Upright Wire Harness (75).
  • Page 9 4. With the help of a second person, hold the con- sole assembly near the Uprights (73, 74). Console Assembly Connect the Upright Wire Harness (75) to the Console Wire Harness (71). See the inset draw- ing. The connectors should slide together easily and snap into place.
  • Page 10 7. Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright Sleeve with two 3/4" Screws (4). Attach the Left Upright Sleeve (not shown) to Console the console assembly in the same way. Assembly 8. With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (83) into the cutout in the cardboard stand as shown.
  • Page 11 Before operating the television, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm ter- minal or the Audio/Video Wire Harness to the audio/video input jacks. No CATV cable, antenna, or adapter is included. HOW TO CONNECT AN ANTENNA Note: Due to an FCC requirement, analog signals will no longer be broadcast over the air after June 12, Place an indoor an-...
  • Page 12: How To Use The Chest Pulse Sensor

    HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR the chest pulse sensor is not dried after each use, it may remain activated longer than necessary, drain- The chest pulse sensor consists of two components— ing the battery prematurely.
  • Page 13: Operation And Adjustment

    OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with high- performance lubricant.
  • Page 14 CONSOLE DIAGRAM FEATURES OF THE CONSOLE with the Marathon workout. iFit workouts automatically control the treadmill while the voice of a personal The treadmill console offers an impressive array of trainer coaches you and motivates you through every features designed to make your workouts more effec- step of your workout.
  • Page 15 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
  • Page 16 5. Follow your progress with the displays. console will not display your heart rate accu- rately. See page 12 for information about the chest The matrix—When you pulse sensor. select the manual mode, the matrix will Before using display a track that rep- the handgrip resents 1/4 mile (400 pulse sensor,...
  • Page 17 HOW TO USE AN EVENT TRAINING WORKOUT To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- 1. Insert the key into the console. ton. The walking belt will begin to move at 1 mph. Adjust the speed of the walking belt as desired by See HOW TO TURN ON THE POWER on page 15.
  • Page 18 HOW TO USE A PRESET WORKOUT segment of the workout. The height of the flashing segment indicates the speed setting for the current 1. Insert the key into the console. segment. At the end of each segment, a series of tones will sound and the next segment of the profile See HOW TO TURN ON THE POWER on page 15.
  • Page 19 HOW TO CREATE A CUSTOM WORKOUT the first segment, simply adjust the speed and in- cline of the treadmill as desired by pressing the 1. Insert the key into the console. speed and incline buttons. See HOW TO TURN ON THE POWER on page 15. When the first segment of the workout ends, a se- ries of tones will sound and the current speed and 2.
  • Page 20 HOW TO USE A CUSTOM WORKOUT If desired, you can redesign the workout while using it. To change the speed setting or the in- 1. Insert the key into the console. cline setting for the current segment, simply press the speed or incline buttons. When the current See HOW TO TURN ON THE POWER on page 15.
  • Page 21 HOW TO USE AN IFIT CARD 3. Press the Start button to start the workout. To purchase iFit cards at any time, see the front cover A moment after you press the Start button, the of this manual or go to www.iFit.com. iFit cards are treadmill will automatically adjust to the first speed also available at select stores.
  • Page 22 HOW TO USE A HEART RATE WORKOUT buttons to change the maximum target heart rate setting (see EXERCISE INTENSITY on page 33). CAUTION: Note: If you change the maximum target heart rate setting, the intensity level of the entire workout will If you have heart prob- change.
  • Page 23 If your pulse is not detected during the program, Your television can receive analog and digital sig- the letters “PLS” will flash in the display and the nals. For the television to operate properly, good speed and/or incline of the treadmill may automati- reception is necessary.
  • Page 24 HOW TO USE THE REMOTE CONTROL Press the EPG button to view the electronic program guide. Note: The electronic program guide is only The first time you use the re- available when viewing ATSC digital television. mote control, insert batteries (see HOW TO REPLACE THE Press the Info button to view information about the cur- BATTERIES IN THE REMOTE...
  • Page 25 HOW TO ADJUST THE TELEVISION SETTINGS 4. Adjust the time settings. You must use your remote control to adjust television Adjust the OSD (on-screen display) duration, sleep settings. Press the Menu button to enter the main timer, time zone, or daylight savings time settings. menu or to return to a previous menu.
  • Page 26 6. Scan and save channels. After all valid chan- nels available in your Select CATV or AIR. Select CATV to receive chan- area have been nels through the 75 ohm terminal on the treadmill. saved into the televi- Program Name Skip FD 3803 Select AIR to receive channels through an antenna.
  • Page 27 THE INFORMATION MODE HOW TO USE THE SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the consoleʼs track of the total distance that the walking belt has sound system, you must connect your MP3 player, CD moved and the total number of hours that the treadmill player, or other personal audio player to the console has been used.
  • Page 28: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord.
  • Page 29: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
  • Page 30 Next, locate the Reed Switch (20) and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley View until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8 in.
  • Page 31 PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
  • Page 32 PROBLEM: The remote control does not function correctly SOLUTION: a. Make sure you are standing on the treadmill, holding the remote control near the television and pointing the remote control directly at the console. b. If your remote control is still not functioning correctly, the batteries should be replaced; most re- mote control problems are the result of low batteries.
  • Page 33: Exercise Guidelines

    EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning any time. During the first few minutes of exercise, your exercise program, consult your physician. body uses carbohydrate calories for energy. Only after This is especially important for persons over the first few minutes of exercise does your body begin age 35 or persons with pre-existing health...
  • Page 34: Part List

    PART LIST—Model No. NTL19007.6 R1009A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description Foot Rail Cover Right Rear Foot Foot Rail Rear Wheel Cushion Screw TV Remote 3/4"...
  • Page 35 Key No. Qty. Description Key No. Qty. Description Latch Warning Decal Upper Latch Bolt AV Wire Nut Latch Knob Not Used Latch Cap Chest Pulse Strap Left Grip Rear Roller Washer Right Grip Incline/Controller Wire 4" Ground Wire Incline Stop Bracket Console TV Cable Stop Bracket Spacer Speaker Cover...
  • Page 36: Exploded Drawing

    EXPLODED DRAWING—Model No. NTL19007.6 R1009A...
  • Page 37 EXPLODED DRAWING—Model No. NTL19007.6 R1009A...
  • Page 38: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

Ntl19007.6

Table of Contents