Table of Contents
Advertisement
Quick Links
5
Remove plunger and column
arms from box, if purchased.
10
Remove cardboard
packaging
814 44th St NW, Suite 103, Auburn, WA 98001
Phone 1-800-BELSHAW 800.578.2547 (+1)206.322.5474
Customer Service info@belshaw.com Technical Support service@belshaw.com
TYPE F - DEPOSITOR QUICK START GUIDE
1
Tools needed to setup the
Belshaw Type F depositor.
a. Box cutter
b. 5/16" wrench or socket
c. 7/16" wrench or socket
d. 5/32" allen wrench
e. Flat tip screwdriver
2
Check packaging for damage before opening.
a. If damage is found contact shipping company.
b. If no damage is found continue.
6
Remove upper
foam packaging
11
Remove center
foam packaging
3
Open the box and check the
Type F for concealed damage.
7
Foam removed
12
Remove hopper
if purchased
9
8
Remove Type F
13
14
Install motor
Remove motor
See QR-0001
Belshaw-QSG-0001_R00_Type F_02/02/24
4
Remove the column mounting
kit or wall mounting kit and
cylinder assembly and oil from
the box if purchased.
See QR code:
QSG-0005 & QSG-0006
to install F column or wall kits.
QSG-0005
QSG-0006
Place on mounting kit pin
www.belshaw.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Belshaw Brothers TYPE F DEPOSITOR
Summary of Contents for Belshaw Brothers TYPE F DEPOSITOR
- Page 1 TYPE F - DEPOSITOR QUICK START GUIDE Tools needed to setup the Belshaw Type F depositor. Remove the column mounting kit or wall mounting kit and a. Box cutter cylinder assembly and oil from b. 5/16” wrench or socket the box if purchased.
- Page 2 TYPE F - DEPOSITOR QUICK START GUIDE Fill with oil Install hopper Push the hopper Install plunger into See QR-0002 tightly onto cylinder cylinder and hopper onto cylinder QR code to Belshaw Type F Cake Donut Depositor Install hopper cylinder Slide crown bearing into Close and tighten Tighten crown...
Need help?
Do you have a question about the TYPE F DEPOSITOR and is the answer not in the manual?
Questions and answers