Polygroup SUMMER WAVES ST1100 Owner's Manual page 13

16. When the Clamp is tightened and no more turns can be
7
made, flip and push the Cam Handle towards the Sand Tank
to secure.
18. The sand filter pump is now fully assembled. To install it to the
pool, connect the Pump Inlet to the pool Outlet with a Long
Hose and one Clamp
r y
Then connect the 6-Port Valve Outlet to the pool Inlet with another
Long Hose and Clamps.
Tighten all the Clamps with a flat-blade screwdriver.
6-Port Valve Outlet
15
13
PUSH
Cam Handle
on each end.
Pool Inlet
15
Pool Outlet
13
15
15
Pump Inlet
17. Connect the Short Hose
6-Port Valve Inlet. Tighten the Hose Clamps
2
screwdriver.
14
15
OWNER'S MANUAL
between the Pump Outlet and the
t
y
6-Port Valve Inlet
15
Pump Outlet
with a flat-blade
13