12. Place the Clamp
around the flange of the 6-Port Valve
7
and Sand Tank
.
2
IMPORTANT: Align the hinge on the Clamp
on the flange of the 6-Port Valve
7
ALIGN
14. Pull on the Cam Handle, and insert the Cam Bolt into the opposite
jaw until it locks in place.
Cam Handle
12
q
with the ridge
7
.
q
10
2
Cam Bolt
13. Close the Clamp
by pushing the two jaws as close together
7
as possible.
15. Hold the Cam Handle with one hand and start turning in
clockwise direction to close the jaws further.
PUSH
7
The hinge of Clamp aligned
with the ridge of 6-Port Valve
Cam Handle