Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
KEMIDOSE DOUBLE
EN
INSTRUCTIONS MANUAL
HANDBUCH
DE
ES
MANUAL DE INSTRUCCIONES
FR
MANUEL D'INSTRUCTIONS
IT
MANUALE D'INSTALLAZIONE
0000139024
Rev. 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KEMIDOSE DOUBLE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Seko KEMIDOSE DOUBLE

  • Page 1 KEMIDOSE DOUBLE INSTRUCTIONS MANUAL HANDBUCH MANUAL DE INSTRUCCIONES MANUEL D'INSTRUCTIONS MANUALE D’INSTALLAZIONE 0000139024 Rev. 1.0...
  • Page 2 0000139024 Rev. 1.0...
  • Page 3: Package Content

    KemiDose | pH · ORP · Chlorine WARNING! Before carrying out ANY work inside control panel of the KemiDose device, make sure you disconnect it from the power supply. Failure to comply with the instructions contained in this manual could cause injury to people and/or damage to the appliance and the system.
  • Page 4: Installation Instructions

    KemiDose | pH · ORP · Chlorine WARNING! These products are DANGEROUS (IÓA) and require special precautions during use, handling and storage. • NEVER mix chemical products. • NEVER allow children or people who have not read this manual to use or tamper with KemiDose or any of its peripheral components (including chemical products).
  • Page 5: Electrical Connections

    KemiDose | pH · ORP · Chlorine 3. ELECTRICAL CONNECTIONS 11 12 13 Double pump system Clamp Description KemiDose pH · ORP KemiDose pH · ORP · CL Input Probe Input Probe Input Temperature TEMP (PT100) TEMP (PT100) Input Probe Not used Free Chlorine Input Freq.
  • Page 6: Technical Specifications

    KemiDose | pH · ORP · Chlorine 4. TECHNICAL SPECIFICATIONS Specifications KemiDose Double PH/ORP KemiDose Double PH/ORP/Chorine Dimensions (H–W–D) H:196x W:205x D:171 mm H:196x W:205x D:171 mm Weight 6 Kg 6 Kg Pump state Pause – Supply Pause – Supply...
  • Page 7: Setting Program

    KemiDose | pH · ORP · Chlorine 5. SETTING PROGRAM 1) Button to increase the value 2) Button to decrease the value 3) Button Menu/Esc 4) Button Cal/OK 5) Button to set the setpoint 6) Digital display Program Setup – Press for 5 seconds At the entry of each menu item, the parameter can be directly modified using the arrow keys ( Confirmation of the current setting and switching to the next item is done by pressing the...
  • Page 8 KemiDose | pH · ORP · Chlorine § Dosing Type pH: Proportional, OFF, On/OFF § Dosing Type ORP: Proportional, OFF, On/OFF • Note: The ORP dosing is disabled if Dosing type chlorine is different than OFF § Dosing Type Chlorine: Proportional, OFF, On/OFF Max Flow Rate pumps: 100% (default: 100% [160 strokes/min], range:10-100%) §...
  • Page 9 KemiDose | pH · ORP · Chlorine 6. pH CALIBRATION 7 pH 60 s Set pH calibration pH 7 calibration 4 pH 60 s pH 4 calibration Save and exit Note: If you have selected the “1 point cal.” function, the calibration will be made only in 1 point using the 7 pH buffer solution Reference calibration CAL Reference...
  • Page 10: Orp Calibration

    KemiDose | pH · ORP · Chlorine 7. ORP CALIBRATION 465 mV 465 mV calibration 60 s Set Redox calibration Save and exit Reference calibration CAL Reference CAL Reference 720 mV 750 mV The unit will flash a temperature value Set the temperature value measured with the instrument Ex.
  • Page 11: Chlorine Calibration

    KemiDose | pH · ORP · Chlorine 8. CHLORINE CALIBRATION Select Cl calibration The unit will flash a Cl value Set the Cl value measured with the instrument 10 s 10 s Ex. 1.0 ppm Free Cl Close flowrate If flowrate is closed The unit saves the parameters.
  • Page 12 KemiDose | pH · ORP · Chlorine Set menu: Press (3 seconds) and adjust set point value and press to confirm. Free Chlorine 1.2 ppm SetPoint Quick setpoint menu measure 7.4 pH 720mV pH measure ORP measure Calibration Menu: Press (3 seconds) and calibrate probe pH, Chlorine, Temperature, ORP System StandBy Press...
  • Page 13 KemiDose | pH · ORP · Chlorine 10. DOSING METHOD Setpoint = 7.4 pH Dosing mode = Acid Prop. Band= 1.5 pH Setpoint = 700 mV Dosing mode = Low Prop. Band = 250mV Setpoint =1.2ppm Free Chlorine Dosing mode = Low Prop.
  • Page 14: Internal Web Server

    KemiDose | pH · ORP · Chlorine 11. INTERNAL WEB SERVER Download SekoLink Register your account Using the QrCode, login to the internal webpages Set: User = ADMIN Password = 0000 Set your WiFi LAN name and password and confirm. Complete your device registration 0000139024 rev.
  • Page 15 KemiDose | pH · ORP · Chlorine Thanks to your registration it is possible to use sekolink and sekoweb. Thanks to sekolink it is possible to mange your pool: • Monitoring and limited management • Smartphone app compatible with iPhone or Android •...
  • Page 16 KemiDose | pH · ORP · Chlorine 12. ALARMS Alarm Display Actions to do Level_______7.2_pH - Push to open Alarm Relay Level_______750_mv Level - Restore Product tank Level_______1.2_ppm - Replace or check the measure probe Alr_band Out of Range measure - Push to open Alarm Relay - Restore measure...
  • Page 17 KemiDose | pH · ORP · Chlorine Connection label: Wire connection: Clamp Description KemiDose pH · ORP Input Probe Input Probe TEMP (PT100) Input Probe A= two wires sensor B= three wires sensor Input free chlorine probe: Input Free Chlorine sensor Pt: Platinum sensor Cu: Cupper sensor Flow Rate (Freq.
  • Page 18 KemiDose | pH · ORP · Chlor ACHTUNG! Vor jeder Maßnahme innerhalb der Steuertafel des KemilDose ist sicherzustellen, dass diese Vorrichtung vom Netz getrennt ist. Die Nichteinhaltung der in dieser Anleitung enthaltenen Anweisungen kann zu Personenschäden, Schäden am Gerät und Schäden am System führen.
  • Page 19 KemiDose | pH · ORP · Chlor ACHTUNG! Diese Produkte sind GEFÄHRLICH (IÓA) und der Umgang mit ihnen, der Gebrauch und die Lagerung erfordern besondere Vorsichtsmaßnahmen. • Chemikalien niemals miteinander vermischen! • Niemals Kinder oder mit dieser Anleitung nicht vertraute Personen die KemiDose oder zugehörige Komponenten einschließlich der Chemikalien verwenden oder damit hantieren lassen.
  • Page 20 KemiDose | pH · ORP · Chlor 3. ELEKTROANSCHLÜSSE 11 12 13 Doppelpumpensystem Klemme Beschreibung KemiDose pH · ORP KemiDose pH · ORP · CL Einlasssonde Einlasssonde Eingangstemperatur TEMP (PT100) TEMP (PT100) Einlasssonde Nicht benutzt Freies Chlor Durchfluss Durchfluss Eingangsfrequenz Signal (Freq.
  • Page 21: Technische Daten

    KemiDose | pH · ORP · Chlor 4. TECHNISCHE DATEN KemiDose Double KemiDose Double Daten pH/ORP pH/ORP/Chor Abmessungen (H–B–T) H:196x B:205x T:171 mm H:196x B:205x T:171 mm Gewicht 6 Kg 6 Kg Pumpenstatus Unterbrechung - Ein Unterbrechung - Ein Sondenkalibrierung...
  • Page 22 KemiDose | pH · ORP · Chlor 5. SETUP-ANLEITUNGEN 1) Taste zur Erhöhung des Wertes 2) Taste zum Verringern des Wertes 3) Taste Menü/Esc 4) Taste Cal/OK 5) Taste zum Einstellen des Sollwerts 6) Digitalanzeige Programm-Einstellung - 5 Sekunden lang gedrückt halten Bei der Eingabe jedes Menüpunktes kann der Parameter direkt mit den Pfeiltasten geändert werden ( Die Bestätigung der aktuellen Einstellung und das Umschalten zum nächsten Punkt erfolgen durch Drücken der Taste...
  • Page 23 KemiDose | pH · ORP · Chlor § Kalibrierung CL: 2 Punkte, Deaktivieren § Kalibrierung Temp: Referenz, Deaktivieren § Dosierungstyp pH: Proportional, Aus, An/Aus § Dosierungstyp ORP: Proportional, Aus, An/Aus Hinweis: Die Redox-Dosierung ist deaktiviert, wenn sich die Dosierungstyp Chlor von AUS unterscheidet §...
  • Page 24 KemiDose | pH · ORP · Chlor 6. pH-KALIBRIERUNG pH 7 Qualitätssonde Qualitätssonde 60 s pH 7-Kalibrierung pH kalibrieren pH 4 60 s pH 4-Kalibrierung Qualitätssonde Speichern und verlassen Hinweis: Wenn die Funktion „1 Punkt Kal.“ eingestellt wurde, wird nur an einem (1) Punkt kalibriert, und zwar mithilfe der Pufferlösung pH 7 Referenzkalibrierung Referenz KAL...
  • Page 25 KemiDose | pH · ORP · Chlor 7. REDOX-KALIBRIERUNG 465 mV Qualitätssonde Redox-Kalibrierung 60 s aufrufen 465 mV-Kalibrierung Speichern und verlassen Referenzkalibrierung Referenz KAL Referenz KAL 720 mV 750 mV Das Gerät blinkt einen Temperaturwert Stellen Sie den Temperaturwert mit dem Instrument gemessen Ex.
  • Page 26 KemiDose | pH · ORP · Chlor 8. CHLOR-KALIBRIERUNG Cl-Kalibrierung auswählen Das Gerät blinkt einen Cl- Wert Den mit dem Messgerät ermittelten Chlorwert 10 s 10 s eingeben Z.B. 1,0 ppm freies Cl Falls die Durchflussmen Durchflussmenge ge schließen geschlossen ist Das Gerät speichert die Einstellwerte.
  • Page 27 KemiDose | pH · ORP · Chlor Einstellungsmenü -Taste 3 Sekunden lang drücken, verwenden, um den gewünschten Wert einzustellen. Schnelles Freies Chlor 1.2 ppm Sollwert Sollwertmenü Messung 7.4 pH 720mV Redox Messung Messung Kalibrierungsmenü -Taste 3 Sekunden lang drücken und kalibrieren Sie die pH-Sonde, die Redox-Sonde, die Chlorsonde oder die Temperatur.
  • Page 28 KemiDose | pH · ORP · Chlor 10. DOSIERUNGSMETHODE Sollwert = 7,4 pH Dosiermodus = Säure Proportionalband = 1,5 pH Sollwert = 700 mV Dosiermodus = Niedrig Proportionalband = 250 mV Sollwert = 1,2ppm freies Chlor Dosiermodus = Niedrig Proportionalband = 0,5ppm 0000139024 rev.
  • Page 29 KemiDose | pH · ORP · Chlor 11. INTERNER WEBSERVER Herunterladen SekoLink Anwendung Registriere dein Konto Mit Hilfe der QrCode, loggen Sie sich in den internen Web-Seiten Set: User name= ADMIN Password= 0000 Stellen Sie Ihr WiFi-LAN Name und Passwort ein und bestätigen. Füllen Sie das Geräteregistrierung 0000139024 rev.
  • Page 30 KemiDose | pH · ORP · Chlor Dank Ihrer Registrierung können Sie sekolink und sekoweb kostenlos nutzen. Dank der sekolink APP Sie Ihren Pool steuern: • Überwachung und begrenzte Verwaltung • Smartphone-App kompatibel mit iPhone oder Android • Für Endbenutzer Verwenden Sie die sekoweb-Adresse www.sekoweb.com oder die APP, um Ihre Pools mit einem professionellen Webportal zu verwalten:...
  • Page 31 KemiDose | pH · ORP · Chlor 12. ALARME Alarme Display Maßnahmen FULLstand___7.2_pH - Zum Öffnen des Alarmrelais drücken FULLstand___750_mv Stufe - Produktbehälter zurücksetzen/auffüllen FULLstand___1.2_ppm - Den Messfühler prüfen, ggf. ersetzen Messung außerhalb des Alr_band - Zum Öffnen des Alarmrelais drücken Arbeitsbereichs - Messung wiederholen...
  • Page 32 KemiDose | pH · ORP · Chlor Beschriften Verbindungen: Kabelverbindungen: Klemme Beschreibung KemiDose pH · ORP Einlasssonde Redox-Sonde Einlasssonde pH-Sonde Temperatursensoreingang (PT100): Einlasssonde A: Temperaturfühler mit zwei Drähten B: Temperaturfühler mit drei Drähten Eingang freies Chlor-Sensor: Eingang freies Chlor- Pt: Platin Sensor Sensor Cu: Kupfer Sensor Frequenzsignaleingang für...
  • Page 33: Contenido Del Embalaje

    KemiDose | pH · ORP · Cloro ¡ADVERTENCIA! Antes de llevar a cabo CUALQUIER TIPO de trabajo en el interior del panel de control del dispositivo KemiDose, asegúrese de desconectarlo de la fuente de alimentación. El incumplimiento de las instrucciones recogidas en el presente manual puede ocasionar lesiones a las personas y/o daños al aparato y al sistema.
  • Page 34: Instrucciones De Instalación

    KemiDose | pH · ORP · Cloro ¡ADVERTENCIA! Estos productos son PELIGROSOS (IÓA) y requieren precauciones especiales durante su uso, manejo y almacenamiento. • No mezcle NUNCA productos químicos. • No permita NUNCA que niños o personas que no hayan leído este manual usen o manipulen KemiDose o alguno de sus componentes periféricos (incluidos los productos químicos).
  • Page 35: Conexiones Eléctricas

    KemiDose | pH · ORP · Cloro 3. CONEXIONES ELÉCTRICAS 11 12 13 Sistema de bomba doble Abrazadera Descripción KemiDose pH · ORP KemiDose pH · ORP · CL Entrada de sonda Entrada de sonda Entrada temperatura TEMP (PT100) TEMP (PT100) Entrada de sonda No utilizado Cloro libre...
  • Page 36: Especificaciones Técnicas

    KemiDose | pH · ORP · Cloro 4. ESPECIFICACIONES TÉCNICAS KemiDose Double KemiDose Double Especificaciones PH/ORP PH/ORP/Cloro Dimensiones (H–W–D) H:196x W:205x D:171 mm H:196x W:205x D:171 mm Peso 6 Kg 6 Kg Estado de la bomba Pausa - Suministro Pausa - Suministro Calibración de sonda...
  • Page 37 KemiDose | pH · ORP · Cloro 5. INSTRUCCIONES DE CONFIGURACIÓN DEL SISTEMA 1) Botón para aumentar el valor 2) Botón para reducir el valor 3) Botón Menú/Esc 4) Botón Cal/OK 5) Botón para configurar el punto de ajuste 6) Pantalla digital Configuración del programa –...
  • Page 38 KemiDose | pH · ORP · Cloro § tipo Dosificacion pH: Proporcional, OFF, On/OFF § tipo Dosificacion ORP: Proporcional, OFF, On/OFF o Nota: La dosificación de ORP está desactivada si el tipo Dosificacion cloro es diferente de OFF § tipo Dosificacion cloro: Proporcional, OFF, On/OFF §...
  • Page 39 KemiDose | pH · ORP · Cloro 6. CALIBRACIÓN DEL pH 7 pH Ajuste la calibración 60 s Calibración pH 7 del pH 4 pH 60 s Calibración pH 4 Guarde y salga Nota: Si ha seleccionado la función “1 punto cal.”, la calibración se hará solamente en 1 punto usando la solución tampón de pH 7 Calibración de referencia CAL Referencia...
  • Page 40 KemiDose | pH · ORP · Cloro 7. CALIBRACIÓN REDOX 465 mV Ajuste la calibración 60 s Redox Calibración 465 mV Guarde y salga Calibración de referencia CAL Referencia CAL Referencia 720 mV 750 mV La unidad parpadeará un valor de temperatura Establecer el valor de temperatura medido con el...
  • Page 41 KemiDose | pH · ORP · Cloro 8. CALIBRACIÓN DEL CLORO Seleccione la calibración CI En la unidad parpadeará un valor CI Ajuste el valor CI medido con el instrumento 10 s 10 s Ej. 1,0 ppm Cl libre Cierre el flujo Si el flujo está...
  • Page 42 KemiDose | pH · ORP · Cloro Menú de configuración: Pulsar (3 segundos) para ajustar el valor del Setpoint y pulsar para confirmar. Medida Cloro libre 1.2 ppm SetPoint Menú rápido de configuración Setpoint 7.4 pH 720mV Medida Medida Menú de calibración: Pulsar (3 segundos) para calibrar la sonda de pH, Cloro, Temperatura, ORP Modo StandBy...
  • Page 43 KemiDose | pH · ORP · Cloro 10. MÉTODO DE DOSIFICACIÓN Punto de ajuste = 7.4 pH Modo de dosificación = Acido Banda proporcional = 1.5 pH) Punto de ajuste = 700 mV Modo de dosificación = Bajo Banda proporcional = 250mV Punto de ajuste =1.2ppm Cloro libre Modo de dosificación = Bajo Banda proporcional = 0.5ppm...
  • Page 44 KemiDose | pH · ORP · Cloro 11. WEB SERVER INTERNO Descargar la aplicación SekoLink Registre su cuenta Con el QrCode, acceder en las páginas web internas Establecer: User name= ADMIN Password= 0000 Configurar su conexión Wi-Fi LAN Nombre y Contraseña y confirmar Complete el registro del su dispositivo 0000139024 rev.
  • Page 45 KemiDose | pH · ORP · Cloro Gracias a su registro, es posible utilizar sekolink y sekoweb de forma gratuita. Gracias a sekolink es posible gestionar su piscina: • Seguimiento con gestión limitada • Aplicación para smartphone compatible con iPhone o Android •...
  • Page 46 KemiDose | pH · ORP · Cloro 12. ALARMAS Alarma Pantalla Acciones para realizar Nivel_______7.2_pH - Pulse para abrir el relé de alarma. Nivel_______750_mV Nivel - Restablezca el tanque de producto. Nivel_______1.2_ppm - Sustituya o compruebe la sonda de medición. Alr_band Medida fuera de rango - Pulse...
  • Page 47 KemiDose | pH · ORP · Cloro Etiqueta de conexiones Conexión de cables Abrazadera Descripción KemiDose pH · ORP Entrada de sonda Entrada de sonda TEMP (PT100) Entrada de sonda A= Sensor de temp. con dos cables B= Sensor de temp. con tres cables Entrada de sonda Cloro libre: Entrada de sonda Pt: Sensor de platino...
  • Page 48: Contenu De L'emballage

    KemiDose | pH · ORP · Chlore ATTENTION ! Avant de procéder à TOUTE intervention à l’intérieur du panneau de commande de l'appareil KemiDose, assurez- vous de le débrancher de l'alimentation électrique. Le non-respect des instructions contenues dans ce manuel peut entraîner des blessures aux personnes et/ou endommager l'appareil et le système.
  • Page 49: Instructions D'installation

    KemiDose | pH · ORP · Chlore AVERTISSEMENT ! Ces produits sont DANGEREUX (IÓA) et requièrent des précautions particulières lors de leur utilisation, leur manipulation et leur stockage. • NE JAMAIS mélanger les produits chimiques. • NE JAMAIS laisser des enfants ou des personnes qui n'ont pas lu ce manuel, utiliser ou manipuler KemiDose ou l’un de ses composants périphériques (y compris les produits chimiques).
  • Page 50: Raccordements Electriques

    KemiDose | pH · ORP · Chlore 3. RACCORDEMENTS ELECTRIQUES 11 12 13 Système de double pompe Serrage Description KemiDose pH · ORP KemiDose pH · ORP · CL Sonde d'entrée Sonde d'entrée Entrée température TEMP (PT100) TEMP (PT100) Non utilisé Chlore Libre Sonde d'entrée Débit (entrée fréq.)
  • Page 51: Specifications Techniques

    KemiDose | pH · ORP · Chlore 4. SPECIFICATIONS TECHNIQUES Spécifications KemiDose Double pH/ORP KemiDose Double pH/ORP/Chlore Dimensions (H–L–P) H:196x L205x P:171 mm H:196x L205x P:171 mm Poids 6 Kg 6 Kg État de la pompe Pause - Alimentation Pause - Alimentation Étalonnage de sonde...
  • Page 52 KemiDose | pH · ORP · Chlore 5. INSTRUCTIONS DE CONFIGURATION SYSTEME 1) Bouton pour augmenter la valeur 2) Bouton pour diminuer la valeur 3) Bouton Menu/Échap 4) Bouton Étal/OK 5) Bouton pour configurer le point de consigne 6) Écran numérique Configuration du programme –...
  • Page 53 KemiDose | pH · ORP · Chlore § TYPE Dosage pH: Prop, Désactivé, On/OFF § TYPE Dosage ORP: Prop, Désactivé, On/OFF o Remarque : Le dosage ORP est désactivé si TYPE Dosage chlore est différent de Désactivé § TYPE Dosage chlore : Prop, Désactivé, On/OFF §...
  • Page 54 KemiDose | pH · ORP · Chlore 6. ÉTALONNAGE pH Définir étalonnage 60 s du pH Étalonnage 7 pH 4 pH 60 s Étalonnage 4 pH Enregistrer et quitter Note: Si vous avez sélectionné «1 point cal.», L'étalonnage sera effectué uniquement en 1 point en utilisant la solution tampon 7 pH Etalonnage de référence CAL Reference...
  • Page 55 KemiDose | pH · ORP · Chlore 7. ÉTALONNAGE ORP 465 mV Définir étalonnage 60 s Étalonnage 465 mV Enregistrer et quitter Etalonnage de référence CAL Reference CAL Reference 720 mV 750 mV L'unité fera clignoter une valeur de température Réglez la valeur de température mesurée avec l'instrument...
  • Page 56: Étalonnage De La Température

    KemiDose | pH · ORP · Chlore 8. ÉTALONNAGE CHLORE Sélectionner étalonnage Cl Une valeur Cl clignote sur l’unité Définir la valeur Cl mesurée avec l'instrument 10 s 10 s Ex. 1,0 ppm de Cl libre Fermer le débit Si le débit est fermé L'unité...
  • Page 57 KemiDose | pH · ORP · Chlore Menu de réglage: Appuyez sur (3 secondes) et ajustez la valeur du point de consigne et appuyez sur pour confirmer. Mesure Chlore Libre 1.2 ppm SetPoint Quick setpoint menu 7.4 pH 720mV Mesure pH Mesure ORP Menu d'étalonnage Appuyez sur...
  • Page 58 KemiDose | pH · ORP · Chlore 10. MÉTHODE DE DOSAGE Point de consigne = 7,4 pH Mode de dosage = Acide Bande proportionnelle = 1,5 pH Point de consigne = 700 mV Mode de dosage = Bas Bande proportionnelle = 250 mV Point de consigne = 1,2ppm Chlore libre Mode de dosage = Bas Bande proportionnelle = 0,5ppm...
  • Page 59 KemiDose | pH · ORP · Chlore 11. SERVEUR WEB INTERNE Téléchargez l'application SekoLink Enregistrer votre compte À l'aide du QR Code, connectez-vous aux pages Web internes Définir : Utilisateur= ADMIN Password= 0000 Définissez le nom et le mot de passe de votre LAN WiFi et confirmez. Terminez l'enregistrement de l'appareil 0000139024 rev.
  • Page 60 KemiDose | pH · ORP · Chlore Grâce à votre inscription, il est possible d'utiliser gratuitement sekolink et sekoweb. Grâce à sekolink, il est possible de gérer votre piscine:: • Suivi et gestion limitée • Application pour smartphone compatible avec iPhone ou Android •...
  • Page 61 KemiDose | pH · ORP · Chlore 12. ALARMES Alarme Affichage Actions à réaliser Niveau_______7,2_pH - Appuyez sur pour ouvrir le relais Niveau_______750_mv Niveau d'alarme Niveau_______1,2_ppm - Restaurer le réservoir de produit - Remplacer ou vérifier la sonde de mesure - Appuyez sur pour ouvrir le relais Bande_Alr...
  • Page 62 KemiDose | pH · ORP · Chlore Étiquette de connexions : Connexions de fils : KemiDose Serrage Description pH · ORP ORP Probe Sonde d'entrée Sonde d'entrée pH Probe TEMP (PT100) A= capteur à deux fils Sonde d'entrée B= capteur à trois fils Entrée sonde de chlore libre: Entrée sonde de chlore libre Pt: Capteur en platine...
  • Page 63: Contenuto Della Confezione

    KemiDose | pH · ORP · Cloro AVVERTENZA! Prima di effettuare QUALSIASI operazione all’interno del pannello di controllo del dispositivo KemiDose, assicurarsi di averlo scollegato dalla rete di alimentazione. Il mancato rispetto delle istruzioni contenute nel presente manuale può causare lesioni a persone e/o danni al dispositivo e al sistema. 1.
  • Page 64: Istruzioni Per L'installazione

    KemiDose | pH · ORP · Cloro AVVERTENZA! Questi prodotti sono PERICOLOSI (IÓA) e richiedono precauzioni speciali durante l’uso, la manipolazione e lo stoccaggio. • Non miscelare MAI i prodotti chimici. • Non permettere MAI a bambini o a persone che non abbiano letto il presente manuale di utilizzare o manomettere KemiDose o i suoi componenti periferici (inclusi i prodotti chimici).
  • Page 65: Collegamenti Elettrici

    KemiDose | pH · ORP · Cloro 3. COLLEGAMENTI ELETTRICI 11 12 13 Sistema a doppia pompa Morsetto Descrizione KemiDose pH · ORP KemiDose pH · ORP · CL Ingresso sonda Ingresso sonda Ingresso temperatura TEMP (PT100) TEMP (PT100) Ingresso sonda Non usato Cloro libero Ingresso segnale freq.
  • Page 66: Specifiche Tecniche

    KemiDose | pH · ORP · Cloro 4. SPECIFICHE TECNICHE KemiDose Double KemiDose Double Specifiche PH/ORP PH/ORP/Cloro Dimensioni (H–W–D) H:196x W:205x D:171 mm H:196x W:205x D:171 mm Peso 6 Kg 6 Kg Stato pompa Pausa - Alimentazione Pausa - Alimentazione...
  • Page 67 KemiDose | pH · ORP · Cloro 5. ISTRUZIONI DI CONFIGURAZIONE DEL SISTEMA 1) Pulsante per aumentare il valore 2) Pulsante per ridurre il valore 3) Pulsante Menu/Esc 4) Pulsante Cal/OK 5) Pulsante di impostazione del Setpoint 6) Display digitale Configurazione del programma –...
  • Page 68 KemiDose | pH · ORP · Cloro § tipo Dosaggio pH: Proporzionale, OFF, On/OFF § tipo Dosaggio ORP: Proporzionale, OFF, On/OFF o Nota: Il dosaggio ORP è disabilitato se tipo Dosaggio cloro diverso da OFF § tipo Dosaggio cloro: Proporzionale, OFF, On/OFF §...
  • Page 69 KemiDose | pH · ORP · Cloro 6. CALIBRAZIONE pH 7 pH Qualità sonda Configura 60 s calibrazione pH Calibrazione pH 7 4 pH 60 s Calibrazione pH 4 Qualità sonda Salva ed esci Nota: Selezionando la funzione “1 punto cal.”, la calibrazione verrà effettuata solo in 1 punto utilizzando la soluzione tampone con pH 7 Calibrazione riferimento CAL Riferimento...
  • Page 70 KemiDose | pH · ORP · Cloro 7. CALIBRAZIONE REDOX 465 mV Qualità sonda Imposta calibrazione 60 s Redox Calibrazione 465 mV Salva ed esci Calibrazione riferimento CAL Riferimento CAL Riferimento 720 mV 750 mV L'unità lampeggerà un valore di temperatura Impostare il valore di temperatura misurato con lo strumento...
  • Page 71 KemiDose | pH · ORP · Cloro 8. CALIBRAZIONE CLORO Seleziona calibrazione Cl Sull’unità lampeggerà un valore Cl Impostare il valore Cl misurato con lo strumento 10 s 10 s Es. 1,0 ppm Cl libero Chiudi portata Se la portata è chiusa L’unità...
  • Page 72 KemiDose | pH · ORP · Cloro Menu impostazioni: Premere (3 secondi) per regolare il valore del Setpoint e premere per confermare. Misura Cloro libero Menu rapido 1.2 ppm SetPoint impostazione Setpoint 7.4 pH 720mV Misura Misura Menu di calibrazione: Premere (3 secondi) per calibrare la sonda pH, Cloro, Temperatura, ORP Modalità...
  • Page 73 KemiDose | pH · ORP · Cloro 10. METODO DI DOSAGGIO Setpoint = 7.4 pH Modalità di dosaggio = Acido Banda Proporzionale = 1.5 pH) Setpoint = 700 mV Modalità di dosaggio = Bassa Banda Proporzionale = 250mV Setpoint =1.2ppm Cloro libero Modalità...
  • Page 74 KemiDose | pH · ORP · Cloro 11. SERVER WEB INTERNO Scaricare l’applicazione SekoLink Registrare il tuo account Grazie al Qr Code collegarsi alle pagine interne del prodotto Impostare: User name = ADMIN Password= 0000 Impostare il nome della WiFi LAN e Password locale. Completa la registrazione del prodotto in rete seguendo i passi della APP.
  • Page 75 KemiDose | pH · ORP · Cloro Grazie alla registrazione è possibile usare la APP sekolink e portale sekoweb. Grazie alla APP sekolink è possibile controllare la tua piscina: • Monitoraggio con gestione limitata • App per smartphone compatibile con iPhone o Android •...
  • Page 76 KemiDose | pH · ORP · Cloro 12. ALLARMI Allarme Display Azioni da eseguire Level_______7.2_pH - Premere per aprire il relè allarmi Level_______750_mv Livello - Ripristinare il serbatoio prodotto Level_______1.2_ppm - Sostituire o controllare la sonda di misura Alr_band Misura fuori intervallo - Premere per aprire il relè...
  • Page 77 KemiDose | pH · ORP · Cloro Etichetta connessioni Collegamento dei cavi Morsetto Descrizione KemiDose pH · ORP Ingresso sonda Ingresso sonda TEMP (PT100) Ingresso sonda A= Sensore temp. con due cavi B= Sensore temp. con tre cavi Ingresso sonda Cloro libero: Ingresso sonda Pt: Sensore in platino Cloro libero...

Table of Contents