Table of Contents
Advertisement
Additional Functions (Continued)
Menu No.
Current Temp.
Compensation value
(24.1°C)
(+2.3°C)
18
E-
Checking and Setting the Indoor Temperature
Compensation for the Wired remote controller
In order to check and set the indoor temperature compensation
using the wired remote controller, hold down the
buttons at the same time for 5 seconds.
1
The menu will display .
Press the
button until is displayed.
2
Press the
button.
The positive and decimal value of indoor temperature of
indoor unit will be displayed in turns. The set compensation
value will flicker.
3
Press the
Note
The temperature will be adjusted by 0.1°C
when the
The compensation value range can be set is
between –9.9°C~ 9.9°C.
4
Press the
button to save the changed setting.
You will move to the menu selection display.
Note
Press the
without setting.
The compensation value will be maintained even after
initialization.
buttons to set the compensation value.
buttons are pressed.
button anytime during setup to exit
and
Advertisement
Table of Contents
