Checking the Centralized Control Usage
In order to check the centralized control usage using the wired
remote controller, hold down the
same time for 5 seconds.
1
The menu will display .
Press the
button until is displayed.
2
Press the
button.
The centralized control usage will be displayed.
Value
Use (Indoor unit Dip switch K2: Off)
Not Use (Indoor unit Dip switch K2: On(default))
3
Press the
button to exit.
You will move to the menu selection display.
Note
Press the
without setting.
and
buttons at the
Data
button anytime during setup to exit
Menu No.
Set value
23
E-