Overview Of Components; Before First Use - Nesco MWR Series Manual

Indicator Light
1. Read and follow all instructions and save for reference.
2. Remove all packaging and labels.
3. Clean all parts, except base, following the instructions in the 'Care and Cleaning '
section.
4. Wipe the roaster base with a damp cloth.
5. Caution: high acidic foods may cause discoloration or dulling of finish of
removable cookwell liner.
IMPORTANT! "SMOKE OUT" OVEN BEFORE USE
It is necessary to "SMOKE OUT" your roaster oven before regular use. You will only need to
perform this procedure once. It is NORMAL for smoke and odor to be present during this
process.
The "SMOKE OUT" process:
1. Place the roaster base in a well ventilated area on a heat-resistant surface.
2. Set the control knob to minimum setting and plug the cord into a 120 volt AC outlet.
3. Turn control knob to maximum setting (450ºF). Operate the roaster base empty
(without the cookwell liner, cover or rack) for approximately 60 minutes, or until any
odor or smoking disappears.
4. When finished, turn the control knob to minimum setting, unplug the unit from the
electrical outlet and allow to cool.

Overview Of Components

Control Knob

Before First Use

2
Lid Handle
Lid
Cooking Rack
Removable
Cookwell Liner
Roaster Base