Related Manuals for Nesco VS-02
Summary of Contents for Nesco VS-02
- Page 1 Electric Vacuum Sealer model VS-02 Care/Use Guide Électrique Vacuum Sealer modèle VS-02 Guide d’entretien et d’utilisation Electricidad Sellador al Vacío modelo VS-02 Guía del cuidado/del uso...
-
Page 2: Table Of Contents
Technical Specifications: Model VS-02 Power input - 120V, 60 Hz Watts - 130W Table of Contents IMPORTANT SAFEGUARDS ................1 Features ...................... 2 Functions ....................3 Operating Instructions .................. 4 Cleaning and Maintenance, Sealing Tips ............5 Troubleshooting ................... 6 ONE YEAR LIMITED WARRANTY .............. -
Page 3: Important Safeguards
6. Do not operate any appliance with damaged cord or plug or after appliance malfunctions, or has been damaged in any manner. Return the appliance to NESCO Factory Service Department for examination, ®... -
Page 4: Features
Features Indicator Rear Lid Lights Bag Cutter Hose Port Unlock Button Unlock Button Cancel Seal Only Vacuum Canister Seal Time Front Lid or Seal Only Selection Release Valve Sealing Bar Sealing Gasket Vacuum Air Intake Sealing Bar Chamber... -
Page 5: Functions
Functions • Cancel Button - Stops the unit at any time. • Seal Only - For sealing a bag without vacuum. • Vacuum/Seal - For vacuuming the bag and automatically sealing it when vacuum is complete. • Canister Only - Vacuum seals using the hose and canister (not included). •... -
Page 6: Operating Instructions
Operating Instructions MAKING A BAG WITH THE ROLL 1. The Bag Cutter must be positioned at either end of the cutter slide slot before cutting. 2. Open the rear lid and place bag roll into Roll Storage Compartment. 3. Pull the bag material out of the Roll Storage to the Pull to select bag size suitable length you want (Pull out enough of the bag roll to hold items to be vacuum packed plus an... -
Page 7: Cleaning And Maintenance, Sealing Tips
Cleaning and Maintenance Vacuum Sealer: 1. Unplug the unit before cleaning. 2. Clean the Vacuum Sealer with a damp sponge. Do not immerse in water. 3. Use a mild dish soap. Do not use abrasive cleaners as they will scratch the surface. 4. -
Page 8: Troubleshooting
Troubleshooting VACUUM SEALER HAS NO POWER • Check to see that the Vacuum Sealer is plugged in. Test electrical outlet by plugging in another appliance. • Vacuum Sealer will shut off automatically if overheated. Allow to cool down for 15 minutes and try again. -
Page 9: One Year Limited Warranty
• Attach the sealed envelope containing the letter inside the carton. Insure the package for the value of the NESCO appliance and ship prepaid to: ® Attn: Factory Service Dept.