Health And Safety - Vapac VIRTUOSO VE05-1P Installation And Operating Manual

Health and safety

G
Ensure that mounting points are suitable for
the weight and loading of the product and if
required, add suitable reinforcement to the
anchoring points area.
Due consideration should be taken into
account for workplace safety, risk assessments
and waste disposal.
Any modification of the product may be
hazardous and the manufacturer is not liable
for any damage or injury caused by improper
use.
Do not use this appliance if any control or
electrical part has been immersed in or come
into contact with water. Immediately call a
qualified service technician to inspect the
appliance and replace any control or electrical
item that has been immersed in water.
This appliance is not intended for use by
persons (including children) with reduced
sensory or mental capabilities or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
The appliance is not designed for use in
hazardous atmospheres containing flammable
vapours.
The Virtuoso VE steam humidifier is exclusively
intended for air humidification within the
specified operating conditions via a steam
hose and distribution pipe, or in the case of
the VE05 and VE09 models via an optional
room distribution unit (RDU). Any other type
of application, without the written consent of
Vapac, will void the warranty.
This manual should be kept in a safe place for
future reference.
Page No 6 of 80 Vapac, Virtuoso VE Humidifier, Installation Manual, EN 2024-01, D301474 Iss 0
Shut off the water supply, drain
the cylinder, isolate the unit
electrically and allow the unit to
cool down before carrying out any
maintenance or other work on the
humidifier.
Never leave water in the steam
cylinder when the appliance is not
in use; always drain it fully.
Do not carry out any work on the
steam distribution system when
the humidifier is in operation.
Do not store or use petrol or other
flammable vapours and liquids in
the vicinity of the appliance.
Improper installation, adjustment,
alteration, service or maintenance
can cause property damage, injury
or death.
Read the installation, operation
and maintenance instructions
thoroughly before installing or
servicing this equipment.
Installation, assembly,
commissioning, service and
maintenance procedures must
be carried out only by suitably
competent qualified persons.
Unauthorised modifications to
the appliance, or departure from
the manufacturer's guidance
on intended use, or installation
contrary to the manufacturer's
recommendations may constitute
a hazard and will void the
warranty.
Use only factory authorised parts
and spares when replacement is
required.
In case of persistent problems,
contact your distributor.