Gear Shifting, Riding And Stopping - Royal Enfield Classic 350 2008 Owner's Manual

Table of Contents

Advertisement

GEAR SHIFTING, RIDING AND STOPPING

Warm up engine for 2 minutes - till idling is
consistent/stable.
GEAR SHIFT PATTERN
1 -- N -- 2 -- 3 -- 4 -- 5
Press clutch lever towards the hand grip.
Press gear pedal with toe towards down to engage
1st gear.
Gently open throttle and release clutch simult-
aneously. If clutch is released suddenly, the engine
may stall and cause a jerky start.
It is recommended to use half clutch condition
when commuting in the city traffic condition along
(Engine rpm around idling to 2000 rpm) at 1st gear
condition. In other gears and higher rpm avoid
Royal Enfield All New Classic 350
56
using half clutch which will proportionately reduce
the clutch life. During acceleration/deceleration
disengage the clutch completely, shift the gear and
engage the clutch.
CAUTION
The clutch must be
fully
disengaged
before attempting a
gear shift. Failure to
fully disengage the
clutch may cause a
jerky start or stalling
the engine besides causing damage to transmission
parts.

Advertisement

Table of Contents
loading

Table of Contents