Connects2 CAN CONNECT TURNCAN-VW1 Instruction Manual

Turn signal can-bus interface

CAN-Connect is the leading CAN-Bus integration solutions for the automotive industry.

CAN-Connect ist die führende CAN-Bus-Integrationslösung für die Automobilindustrie.

CAN-Connect son las soluciones de integración CAN-Bus líderes en la industria del automóvil.

CAN-Connect est le leader des solutions d'intégration Can-bus de l'industrie automobile.

CAN-Connect è la principale soluzione di integrazione CAN-BUS nel settore automobilistico.

Technical Support?

for technical support please use our

dedicated system support.connects2.com

c2canconnect.com

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s.

This instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to

the vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.

Please read the manual prior to installation. Technical knowledge is necessary for installation. Please ensure you use the correct

WWW.C2CANCONNECT.COM

tools to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product.

Turn Signal CAN-Bus Interface

DISCLAIMER

TURNCAN-VW1

Table of Contents

Need help?

Do you have a question about the CAN CONNECT TURNCAN-VW1 and is the answer not in the manual?

Page 1 Please read the manual prior to installation. Technical knowledge is necessary for installation. Please ensure you use the correct WWW.C2CANCONNECT.COM tools to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product.
Page 2 PRODUCT INFORMATION The Turn CAN Interface is a CAN Bus interface that provides multiple low-level outputs that can be used to control various aftermarket accessories. The data is decoded from the vehicle’s CAN Bus and used to switch power to the connected accessory. FUNCTIONALITY The Turn CAN provides various CAN Bus outputs.