Replace The Battery - Honeywell CT30 XP Series User Manual

Swap Battery Mode
Swap Battery mode places the computer in a lower power state so that the battery
can be removed for a short time.
To activate Swap Battery mode:
1. Press and hold the Power button until the options menu appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.

Replace the Battery

Caution: Improper battery replacement or incompatible device usage may
Remove the battery
1. Either power off the computer or place it in battery swap mode. See
2. Release the hand strap, if applicable.
3. Pull down on the battery latch to unlock the battery.
4. Lift up on the edge of the battery and remove it from the computer.
6
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
Attempting to Remove the Battery on page 5.
CT30 XP Mobile Computer User Guide
Before