Table of Contents
Advertisement
II-2.
Connection
1. Power on: Connect the power cord to the switch and the power outlet. The
switch is powered by the 100-240VAC 50/60Hz external high- performance
power supply. (Note: Make sure the PWR LED is green.)
2. Plug the SFP/SFP+ module or DAC/AoC cable into the SFP/SFP+ slot Port
25~28 and connect it to another switch SFP/SFP+ Port.
Note: Make sure that the SFP+/SFP Port LED is blue or green.
These 2 connected SFP+/SFP ports of the switches must be set into
the same speed.
If the LED is off, please edit the Speeds of these 2 connected
SFP+/SFP ports to be consistent.
manual " Port Setting"
3. Connect a computer: Connect your computer with the switch and get ready
for web-based configuration with following "Web-based Configuration
Utility".
For more detail, pleae refer to user
4
Advertisement
Table of Contents
