Advertisement
Quick Links
Advertisement
Related Manuals for Little Folks Furniture Fargo FUT001
Summary of Contents for Little Folks Furniture Fargo FUT001
- Page 1 Fargo Futon Bed Code: FUT001 PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE...
-
Page 2: Product Safety
Thank you for buying a piece of furniture Treated properly it should be a faithful servant for years - and we hope you get the same amount of pleasure from it. Before you do please take a few minutes to read these instructions we suggest you carefully unpack everything, lay it out on a clean, flat floor and identify everything on the parts list in these instructions. -
Page 3: Parts List
Parts list 1 x pivot rails 2 x chair sides 1 x seat sides 1 x chair back 2 x long Mattress Bases (8 slats) 1 x seat front 1 x short Mattress Bases (4 slats) Fittings 4 x Bolts 5cm 8 x Dowels 4 x Bolts 3.5cm 24 x Screws... - Page 4 Fitting the parts 8 x dowels Insert 2 x dowels into the two large holes at each end of the two parts listed. 1 x chair back 1 x seat front Make the seat and chair 4 x 5cm bolts and 4 x barrel nuts Orientate the parts as shown, align the dowels and insert 4 x barrel nuts into the holes on the seat front and chair back.
- Page 5 Fix the bases 16 x Wood screws and a screwdriver Lift the long mattress bases onto the seat and chair frames, align the holes with the pilot holes in the supports beneath and screw each slat down. X 16 Fix the pivot rails 4 x 3.5cm bolts, 4 x sleeve nuts, 4 rings and 2 x allen keys Orientate the pivot rails as seen.
- Page 6 Fix the central base 8 x Wood screws and a screwdriver Lift the short mattress base onto the central frame (pivot rails), align the holes with the pilot holes in the supports beneath and screw each slat down. Convert from bed to Chair lift the chair back upwards, allow the rear to slide forward and then fit tight to the seat.