Advertisement
Quick Links
Advertisement
Related Manuals for Little Folks Furniture DSK004
Summary of Contents for Little Folks Furniture DSK004
- Page 1 Childrens Desk Code: DSK004 PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE...
-
Page 2: Product Safety
Thank you for buying a piece of furniture Treated properly it should be a faithful servant for years - and we hope you get the same amount of pleasure from it. Before you do please take a few minutes to read these instructions we suggest you carefully unpack everything, lay it out on a clean, flat floor and identify everything on the parts list in these instructions. - Page 3 Parts Base Right Side Left Side Open side Rear brace plinth modesty panel 1 x Drawer Front 2 x Drawer Sides (left & Right) 1 x Drawer Back 1 x Drawer base 1 x door Fittings 2x Small Cams 22 x Large Cams 2 x Small Cam Pins 22 x Large Cam Pins 16 x Dowels...
-
Page 4: Assemble The Unit
Fit the sides 12 x dowels, 8 x large cam pins and 4 x feet Screw the cam pins into the smaller holes on each side. Insert the wooden dowels into the holes on the sides and top edges as shown. Now insert the feet into the holes at the bottom of each side. - Page 5 Fit the top Select which side you would like the storage unit. (storage unit on the left for these instructions) insert 10 large cam pins into the smaller holes as shown X 10 Image of right side fittings Fit the open side 2 x large cam pins and 2 x feet insert the cam pins into the holes as shown (left side storage position) If right side select the opposite set of holes.
- Page 6 Make the desk 2 x large cams, 2 x 3cm bolts, 2 x sleeve nuts and 2 x Allen keys. Connect the modesty panel to the open side connecting the two parts with the two large cams. Now fix the modesty panel to the rear rail of the storage unit using the two 3cm bolts and 2 sleeve nuts.
- Page 7 Make the drawer 2 x Small Cams 2 x small cam pins Fix 2 small cam pins into each drawer front. Insert 2 small cams into each drawer side, left and right (see image for orientation) Gently slide the drawer sides over the cam pins, inserting the drawer base at the same time (this helps with alignment) Note: Base edge with corners removed locate into the drawer front.
- Page 8 Fit the door 2x hinge plates, door stop and 2 x 1cm screws. Fix the hinge plates to the carcass sides as shown. Note that the door can be fitted on the left or right of the carcass depending on your choice. Now fit the door stop using 2 x 1cm screws Fit the door 2x Hinges...
- Page 9 Fit the door slide the door onto the hinge plates and connect the back screw to fix. Rotate the rear screw to lock the hinge to the hinge plate Rotate the front screw inwards and outwards to adjust the door Adjust the Door Hinge plate screws for up and down Front screw for in and out...
- Page 10 Locate the Desk Gently lift the carcass into location. Fix the wall strap to the rear of the carcass and connect to the wall. Little Folks Furniture do not supply wall fixings due to the wide ranging differences of wall construction. Warning : This work should only be carried out by a competent person or a professional.