Configuring 3G/4G Settings; Through The Wireless 3G/4G Module - Dahua DH-XVR42 AN-I Series User Manual

Parameter
Refresh
Connect
Disconnect
Step 3 (Optional) Click Firmware Update, select related firmware file, and then click OK.
Step 4 Click Apply to complete the settings.
After the Device is connected to a Wi-Fi hotspot, in the Wi-Fi Info area, the current
hotspot, IP address, subnet mask, and default gateway are displayed.

5.15.1.4 Configuring 3G/4G Settings

5.15.1.4.1 Through the Wireless 3G/4G Module

You can connect a wireless 3G/4G module to the USB port of the Device and then access the Device
with the IP address provided by the module.
This function is available on select models.
Procedure
Step 1 Connect the wireless 3G/4G module to the USB port of the Device.
Step 2 Select Main Menu > NETWORK > 3G/4G.
Description
Refresh the hotspot list. The self-adaption function such as
adding password is supported if such setting was once
configured.
In the hotpots list, select a hotspot, and then click Connect.
● To reconnect the same hotspot, disconnect first and then
reconnect.
● To connect to other hotspot, disconnect from the current
connected hotspot first, and then connect to the other
hotspot.
To disconnect from a hotspot, click Disconnect.
255
User's Manual