Configuring Network Service Settings - Dahua MCVR6204 User Manual

Step 1 Select Main Menu > INFO > REMOTE DEVICE INFO > Connection Log.
The Connection Log interface is displayed. See Figure 4-54.
Step 2 Select a channel, and then enter the start time and end time.
Step 3 Click Search.
The connected logs are displayed.

4.3.2 Configuring Network Service Settings

You can configure the network services such as DDNS, email, FTP, P2P, Switch, and perform
network testing.
4.3.2.1 Configuring DDNS Settings
When the IP address of the Device changes frequently, the DDNS function can dynamically
refresh the correspondence between the domain on DNS and the IP address, ensuring you
access the Device by using the domain.
Preparation
Make sure the type of DNS supported by the Device has been obtained.

Login the website provided by the DDNS service provider to register the information such

as domain from PC located in the WAN.
After you have registered and logged in the DDNS website successfully, you can view the
information of all the connected devices under this user name.
Procedure
Step 1 Select Main Menu > SETTING > NETWORK.
Figure 4-54 Connection log
Local Configurations 69