Digital Output; Entering A Password - Yamaha DVD-S1200 Owner's Manual

Changing settings

Digital output

Refer also to "Common procedures" (á page 23) and the Audio menu
in "Summary of settings" (á page 24).
PCM Down Conversion
Select how to output the high-quality audio signals (sampling fre-
quencies of 96 kHz and 88.2 kHz) on discs that do not have copyright
protection. Choose the settings to suit the equipment you have con-
nected.
Equipment
Setting (Able to handle
88.2 kHz or more)
1
No Yes
Yes No
1
The equipment cannot output signals of 88.2 kHz or more if the
setting is "No" and the equipment is unable to handle these signals.
Note
Signals are down-sampled to either 48 kHz or 44.1 kHz despite the
above settings if they have a sampling frequency of 176.4 kHz or
more or are copyright protected.
Dolby Digital
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital decoder.
PCM:
When you have connected a unit that doesn't have a built-in Dolby
Digital decoder. 2
DTS Digital Surround
PCM (Factory preset):
When you have connected a unit that doesn't have a built-in DTS
2
decoder.
Bitstream:
When you have connected a unit with a built-in DTS decoder.
MPEG
PCM (Factory preset):
When you have connected a unit that doesn't have a built-in MPEG
2
decoder.
Bitstream:
When you have connected a unit with a built-in MPEG decoder.
2
These changes to digital audio output must be made, other-
wise bitstream signals the decoder cannot handle will be out-
put. If these signals are output, "noise" will be output which
can cause harm to your ears and speakers.
28
Refer also to "Common procedures" (á page 23) and the Disc menu
in "Summary of settings" (á page 24).
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numeric buttons and press
Audio output
Output as is
Down-sampled to
48 kHz or 44.1 kHz
2. Press [ENTER] to confirm the 4 digits.
The password screen is shown when you select "Ratings".
1. Input your 4-digit password with the numeric buttons and press
2. Select the item with the cursor buttons [ , ] and press

Entering a password

When setting ratings
(When the level is 8)
[ENTER].
SETUP
Ratings
Enter a 4-digit password,
then press ENTER.
SELECT
Password
ENTER RETURN
If you enter a wrong number, press [CANCEL] to erase it before
you press [ENTER].
The lock symbol appears closed to show the rating is locked.
Do not forget your password.
Now, when you insert a DVD-Video that exceeds the ratings
limit you set, a message appears on the television.
Follow the on-screen instructions.
When changing ratings
[ENTER].
SETUP
Ratings
Unlock Player
Change Password
Change Level
SELECT
Temporary Unlock
ENTER RETURN
[ENTER], and follow the on screen instructions.
(When the level is 0 to 7)