Screen For Unit Information - Yamaha DVD-S1200 Owner's Manual

A
a
b
AB
OFF
B
e
U1
U2
22
c
d
– – – 1 2 3
f g h i j
0 0 0
0
k l m
0 0 0
Using GUI screens

Screen for unit information

Play menu
A
Icon
A-B repeat (á page 18)
[ENTER] (start point) á [ENTER] (finish point)
To cancel: [ENTER]
Repeat play (á page 18)
Play mode display
0
---: Off
ALL: All group play (
Marker: You can mark up to 5 positions to play again
(á page 15).
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
To mark another position: [ ,
To recall a marker:
To erase a marker:
Video menu
B
Icon
Digital picture mode
To select the picture mode: [ ,
N: Normal mode
S: Soft mode (Soft picture with fewer video artifacts)
F: Fine mode (Details are sharper)
C: Cinema mode (Picture for viewing movies)
U1, U2: User mode
To change U1 and U2
1. Select User Mode and press the cursor button [ ].
2. Press the cursor buttons [ ,
3. Press the cursor buttons [ ,
you want to change.
4. Press the cursor buttons [ ,
setting.
U1
U2
Note
The unit saves the settings you make with the user mode for each
disc so when you play a disc again and select a user mode, the same
settings are selected. Discs you play for the first time use the previ-
ous settings. The unit can save settings for up to 200 discs. The set-
tings for a disc are not saved if you switch to normal, soft, fine, or
cinema mode before opening the disc tray or switching the unit to
standby.
Content
C (Chapter),.T (Title),.OFF
^-------------------------------------J
T (Track),.A (All)/G (Group),.OFF
^-------------------------------------------------J
PGM: Program play RND: Random play
)
[ENTER] (at the desired point)
] á [ENTER]
] á [ENTER]
[ ,
] á [CANCEL]
[ ,
Content
]
] to select 1 or 2.
] to select the item
] to change the
Contrast ( 7 to 7)
Increases the contrast between white and black
parts of the pictures.
Brightness (0 to 15)
Brightens the picture.
Sharpness ( 6 to 6)
Adjust the horizontal resolution of the picture.
Colour ( 7 to 7)
Adjust the shade of the picture's colour.
Gamma (0 to 5)
Increases the brightness of the center ranges to
improve detail and contrast in dark scenes.
3D-NR (0 to 4)
Reduces overall noise.
Block NR (0 to 3)
Smoothes block noise.
Mosquito NR (0 to 3)
Reduces the smudging that appears around
contrasting sections of the picture.