Setting The Analog Output; Setting The Digital Output; Turning The Hdmi Audio On/Off - Yamaha DVD-S661 Owner's Manual

Setting the analog output

Set the analog output to match the playback
capability of this unit.
1
In "AUDIO SETUP PAGE", press 5/a to
highlight [ANALOG OUTPUT], and then
press 3.
STEREO
Select this to change channel output to stereo,
which only delivers sound from the two front
speakers.
LT/RT
Select this if this unit is connected to a Dolby
Pro Logic decoder.
2
Press 5/a to select a setting, and then
press ENTER.

Setting the digital output

The [DIGITAL AUDIO] options are:
[DIGITAL OUTPUT] and [LPCM OUTPUT].
1 In "AUDIO SETUP PAGE", press 5/a to
highlight [DIGITAL AUDIO], and then
press 3.
2
Press 5/a to highlight an option.
3
Press 3 to open a submenu.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel decoder/
receiver.
MPEG ➜ PCM
Select this if your receiver is not capable of
decoding MPEG audio signals.
PCM ONLY
Select this only if your receiver is not capable
of decoding multi-channel audio signals.
LPCM OUTPUT
Select this if you have connected this unit to a
PCM-compatible receiver via a digital
terminal, such as the coaxial terminal. In this
case, you may need to adjust [LPCM
OUTPUT].
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.
48KHz
Select this to play back discs recorded at the
sampling rate of 48 kHz. All 96 kHz PCM data
streams (if available) are converted to the
sampling rate of 48 kHz.
96KHz
Select this to play back discs recorded at the
sampling rate of 96 kHz. If the 96 kHz disc is
copy protected, the digital output is
automatically converted to the sampling rate of
48 kHz.
4
Press 5/a to select a setting, and then
press ENTER.

Turning the HDMI audio on/off

When you connect this unit to an HDMI
compatible component via the HDMI jack,
select to turn on or off the HDMI audio output.
1 In "AUDIO SETUP PAGE", press 5/a to
highlight [HDMI AUDIO], and then
press 3.
ON
Select this to turn on the HDMI audio output.
OFF
Select this to turn off the HDMI audio output.
Setup Menu
25
En