Table of Contents
Advertisement
TO PLAY ONLY DESIRED TRACKS/DISCS (Program Playback and Delete Program Playback)
Programming a pause
Inserting a pause in your program can be very useful when carrying
out recording. Press if instead of entering a track number.
"PA"
appears on the display panel
@
For example, when recording on both sides of a cassette tape,
if you program a pause after the fast track to be recorded on
the first side, program playback will pause at that point to allow
you to switch tape sides. To resume program playback after the
player enters pause mode, press Hf.
NOTES:
@
A pause can be programmed only when the program procedure
is performed under stop mode.
@ A pause cannot be programmed at the beginning of a program
{P-01}, nor can two pauses be programmed one after the other.
®@ A pause inserted in a program is counted as one step.
e@ /f a pause is programmed as the last step of a program, the
player will not enter the pause mode.
| To clear all of the program contents
PD-DMg02
@
During stop mode, press a.
@® > When the magazine is ejected, the program contents of the
ejected magazine will be cleared.
| To erase a program
During program mode, press CLEAR.
The last program step is erased and the contents of the previous
program step are displayed.
NOTE:
Contents of a program can be erased during playback as well,
However, tracks preceding the currently playing track cannot be
erased in this way.
18
<PRB1189>
En
A
During program
mode,
set the player to stop mode
and press
CHECK.
The program contents will be displayed in the programmed
order.
e@
After confirming the last program step, the display will show
"0-0-00
°".
To modify the program contents
1
2
Disc number
Track number
1
During program mode, set the player to stop mode and press
CHECK so that the program step to be corrected appears on
the display.
2 To correct the magazine No., enter the new magazine No. with
MAGAZINE.
To correct the disc No., enter the new disc No
with disc number. To correct the track No., enter the new track
No. with track number/digit. For example, the programmed track
No. 9'on disc No. 1 in magazine No. 1 is changed to track No. 2
on disc No. 2 in magazine No. 2, using MAGAZINE 2, DISC 2
and track number 2.
e@ Repeat steps 1 and 2 to change other tracks as desired.
@
To correct the track No., you can use Kid
<< OF DB
BB.
After selecting the track No., be sure to press PROGRAM.
es
Advertisement
Table of Contents
