Adjusting Sound Quality; Advanced Setup - Pioneer PD-70AE Instruction Manual

> Before Start > Part Names

Adjusting sound quality

Reproduce the original sound faithfully
(DIRECT mode)
Processing that affects sound quality is shut down so sound
closer to the original is reproduced.
(Default Value): OFF
1. Press DIRECT (a).
0 The DIRECT indicator on the front of the main unit lights
when the DIRECT mode is ON.
0 When the DIRECT mode is ON, DIGITAL OUT is turned
OFF.
0 In the DIRECT mode, the display turns off automatically
when playing CD and SACD.
DIGITAL FILTER
Select one of three types of DIGITAL FILTER.
1. The setting changes each time you press DIGITAL
FILTER (b).
"SLOW": Soft and fluid sound
"SHARP" (Default Value): Sound with more structure and
firmness
"SHORT": Sound that starts quick and seems to move
forward
0 You can also press SETUP (d) to display the DIGITAL
FILTER setting screen from the SETUP menu. In this
case, select the setting value with
controller.
Adjusting the lock range (LOCK RANGE
ADJUST)
Sound quality is improved by narrowing the lock range to
reduce incidental sounds. However, narrowing the lock
range too much can cause interruptions to sound and noise.
Adjust the lock range while listening to some audio.
(Default Value): RANGE 4
1. Press LOCK RANGE (e).
> Install > Playback
2. Select the setting value with /
controller.
"RANGE 6" (broad) to "RANGE 1" (narrow)
0 You can also press SETUP (d) to display the LOCK
RANGE ADJUST setting screen from the SETUP menu.
0 LOCK RANGE ADJUST has no effect on the audio of
SACD and DSD.
/ (c) on the remote
(f) on the remote
a
b
c
d
Advanced Setup | Others
e
f
En 15