Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gage Bilt GB703SHVTPTS
Summary of Contents for Gage Bilt GB703SHVTPTS
- Page 1 ORIGINAL INSTRUCTIONS GB703SHVTPTS INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT 44766 Centre Court, Clinton Twp., MI. 48038 USA Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 MADE in USA solutions@gagebilt.com / www.gagebilt.com...
-
Page 2: Table Of Contents
Description and Technical Specifications ..........................4 Description of Functions ................................5 Warnings ..................................... 6 Principle of Operation ................................7 How to set-up the GB703SHVTPTS ............................8 How to use the GB703SHVTPTS ............................... 9 Maintenance and Hydraulic Thread Preparation ........................10 Filling ....................................... 11 Bleeding .................................... -
Page 3: Eu Conformity And Warranty
GAGE BILT DECLARATION OF CONFORMITY MANUFACTURER: Gage Bilt Inc. 44766 Centre Ct., Clinton Twp., Michigan +1(586-226-1500) WE DECLARE THAT THE EQUIPMENT SPECIFIED HEREIN CONFORMS TO THE FOLLOWING DIRECTIVES AND STANDARDS Machinery Directive 2006/42/EC EN12100-1 & EN12100-2:2010 EN ISO 11148-1:2011 EU REPRESENTATIVE Edgar Hausmann GmbH Förster-Busch-Str. -
Page 4: Description And Technical Specifications
The GB703SHVTPTS split handle installation tool operates on 90 to 100 psi. (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB703SHVTPTS does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle). -
Page 5: Description Of Functions
Head Cylinder Assembly Nose Assembly Pintail Evacuation Tube Actuator Bleed Screw Handle Assembly Hydraulic Hose “Pull” Bleed Screw Air Line “Return” Flow_Speed Handle Assembly Control valve Air Inlet Vacuum Image may not reflect actual tool 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... -
Page 6: Warnings
4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... -
Page 7: Principle Of Operation
Piston Rod Assembly moves up Air Piston Piston Rod Assembly moves up moves down Air Piston moves down Air exhaust Air exhaust Pressurized Oil Pressurized Air Unpressurized Oil Unpressurized Air Image may not reflect actual tool 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... -
Page 8: How To Set-Up The Gb703Shvtpts
HOW TO SET-UP THE GB703SHVTPTS WARNING: Only qualified and trained operators must install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 9: How To Use The Gb703Shvtpts
HOW TO USE THE GB703SHVTPTS WARNING: Only qualified and trained operators must install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 10: Maintenance And Hydraulic Thread Preparation
WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided. -
Page 11: Filling
Manifold Handle (744303). Bleeder hole on head cylinder assembly (703113) facing upward. Handle Assembly and Power Cylinder hole Oil Passage hole O’ring (S832) ***Keep air hole free from oil*** Images may not reflect actual tool. 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... -
Page 12: Bleeding
Subtract dimension (B) from dimension (A). If stroke is not consistent within 1/64" (.396 mm) repeat bleeding procedure until stroke met. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke. Please contact Gage Bilt for more information. -
Page 13: Troubleshooting
Note: The vacuum regulator may visually appear clean, but still may be contaminated with a thin film, therefore, the steps above should be performed to assure best performance. Image may not reflect actual tool 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... -
Page 14: Overhaul
Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings. - Page 15 Using a 5/8” wrench or an adjustable wrench, lightly tighten the actuator assembly-air (704130) to the adapter (704325) as shown above. Do not over tighten as this may damage or break the actuator assembly-air (704130). 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL...
- Page 16 If ports are plugged, use needle nose pliers to grasp end of spring (744144), turning clockwise and pulling to dislodge from groove in casting. Valve spring installation tool (744251) will facilitate the proper installation of the spring (744144). Valve sleeve (743144) can be pulled out using valve sleeve removal tool (744152). 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL...
-
Page 17: Parts Lists
PARTS LIST 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... - Page 18 PARTS LIST 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL...
-
Page 19: Dexron® Iii Oil Safety Data
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... -
Page 20: Nose Assembly Selection Chart And Accessories
AND SERRATED STEM RIVETS YOU MUST ORDER THE NOSE ASSEMBLY WITH A 743 DESIGNATION, I.E. MGL06-743-24VPSA. NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL... - Page 21 “V” DESIGNATION = PINTAIL COLLECTION BOTTLE OPTIONS The GB703 series installation tools may be ordered with a vacuum system. Gage Bilt offers two varieties (see below). Order GB703 series installation tools fastener specific by adding the appropriate suffix (see selection chart).
- Page 22 Entire tool weight - 4.50 lbs. (2kg) Pull load - 2,200 (9.8 kN) GB703SHVTPTS ACCESSORIES Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Fill Bottle Air Bleeder Assembly...
- Page 23 This page intentionally left blank 11/21 REV 5/22 GB703SHVTPTS: INSTALLATION TOOL...
- Page 24 Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Approved Split Riveter Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION.
Need help?
Do you have a question about the GB703SHVTPTS and is the answer not in the manual?
Questions and answers