Step 5 Connect Power Supply To Booster - weBoost Drive Reach OTR Installation Manual

STEP 5 Connect Power Supply
to Booster
Connect the 12V power supply cord to the end
of the booster, labeled "12V DC." Then plug
the power adapter into vehicle's 12V DC power
supply. Push switch to ON position. If your
Drive Reach is working correctly, the light on
the booster will be green. Use only the power
supply provided in this package.
connect Power
NOTE: If the 12V cigarette lighter port on your
Supply Cord
car is always on (even when your vehicle
is turned off) and you will be parking for
extended periods of time (more than a day),
we recommend you turn the booster off by
plug into vehicle's 12V
DC Power Supply
pushing power cord switch to OFF position. This
will prevent the Drive Reach from draining the
battery in your vehicle.
10