Modifying the Hoses, Installing the Degas
☐
Using the supplied M8 fasteners, install the degas bottle brackets in the
location shown. Leave the fasteners finger tight (Figure 24).
☐
Using the supplied fasteners, install the degas bottle onto the degas bottle
brackets (Figure 25).
☐
Tighten all of the fasteners to specification.
22
Bottle, and Cooler
Figure 24 — Install degas bottle brackets
Figure 25 — Install degas bottle brackets
VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com