Modifying the Hoses, Installing the
Modifying the Coolant Hoses
Apply Loctite 242 (blue) to all engine mounted fasteners.
Optional: Removing the passenger side inner fender will improve access to the
lower radiator hose.
☐
Remove passenger side inner fender.
☐
Uncouple the lower radiator hose assembly at the engine and radiator and
remove the assembly from the engine bay (Figure 16).
☐
Roll the OEM anti-abrasion mesh up towards the radiator side quick connect as
this will be retained on the hose.
☐
From the OEM quick connector cuff on the radiator side of the hose, measure
4 1/2 in along the outside radius towards the center of the hose and mark with
a grease pen (Figure 17).
VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
Cooler
To radiator
Figure 16 — Lower radiator hose
Figure 17 — Lower radiator hose modification
To engine
To radiator
4 1/2 in
19