Part 2: Installing The Tank And Hoses; Installing The Tank And Frame Mounts - Vmac VR70 Installation Manual

Part 2: Installing the Tank and
The tank will mount on the driver side frame rail behind the front cab
mount.
Apply Loctite to all fasteners before installing them.

2.1 Installing the Tank and Frame Mounts

Tank strap cable
Tank strap mount
Lower
frame
clip
1/4 and 3/16" tubes
1. Remove the pinch bolts from the C-clamps, spread the clamps
slightly and slide them over the front of the tank.
2. Rotate the C-clamps so that the flat mounting surfaces are on
the right side of the tank, as viewed from the back of the tank
(Figure 2.2).
VMAC – Vehicle Mounted Air Compressors
Toll Free: 1-800-738-8622
Fax: 1-250-740-3201
Hoses
Spacer for
F250-F350
Oil filter
Figure 2.1
Upper frame clip
3/4" hose fitting
1/2" hose fitting
C-clamp
9