AEG BSE577261M User Manual page 37

Step 1 Fully open the door and find the hinge
to the right side of the door.
Step 2 Use a screwdriver to lift and turn fully
the right side hinge lever.
Step 3 Find the hinge to the left side of the
door.
Step 4 Lift and turn the lever fully on the left
hinge.
Step 5 Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door
from its seat.
Step 6 Put the door on a soft cloth on a sta‐
ble surface.
Step 7 Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
Step 8 Pull the door trim to the front to re‐
move it.
Step 9 Hold the door glass panels by their
top edge and carefully pull them out
one by one. Start from the top panel.
Make sure the glass slides out of the
supports completely.
CARE AND CLEANING
2
B
1
37/44