Toshiba MCY-MHP0806HT8-C Series Service Manual page 173

Step Component
17 Handle 1. Detachment
(Front panel)
1) Remove the lower part of front panel. ["2)" of
Step.1]
2) Remove the cushion without tearing it.
(Fig.17-1)
3) Use a flathead screwdriver or something to
press on the 3 clamp hooks on the handle and
remove it. (Fig.17-2)
2. Attachment
1) install it in the reverse of the procedure to
remove it.
• The cushioning for the handles acts as
• Refer to the fig.17-1 for the vertical and
18 Handle 1. Detachment
(Side panel)
1) Remove the lower part of side panel. [Step.3]
2) Remove the cushion without tearing it.
(Fig.18-1)
3) Use a flathead screwdriver or something to
press on the 3 clamp hooks on the handle and
remove it. (Fig.18-2)
2. Attachment
1) Install it in the reverse of the procedure to
remove it.
• The cushioning for the handles acts as
• Refer to the fig.18-1 for the vertical and
Procedure
waterproofing, so carefully stick it back on its
original position so there are no gaps caused
by it ripping or lifting up.
horizontal positions where the cushion is to
be attached.
waterproofing, so carefully stick it back on its
original position so there are no gaps caused
by it ripping or lifting up.
horizontal positions where the cushion is to
be attached.
Hook
Reference position of
sticking the cushion
Reference
position of
sticking the
cushion
172
Remarks
Lower part of
front panel
Cushion
Reference
position of
sticking
the cuhion
(Fig.17-1)
Flathead screwdriver
Clamp hook
(3 positions)
(Fig.17-2)
Cushioning
Reference
position of
sticking the
cushion
Reference position of
sticking the cushion
(Fig.18-1)
Flathead screwdriver
Clamp hook
(3 positions)
(Fig.18-2)