Toshiba MCY-MHP0806HT8-C Series Service Manual page 172

Step Component
16 Heat 12) Remove the screws of the condenser coupling
exchanger plate and heat exchanger assembly.
assembly (M4×10,18) (Fig. 16-5))
(continued)
13) Remove the screws of the bottom plate and heat
exchanger assembly. (M4×10, 2) (Fig. 16-6)
CAUTION
• Carry out the work with the number of
individuals which is sufficient to avoid danger
and ensure safety.
• Be careful to ensure that the pipes will not be
deformed as a result of applying force to them.
• Be careful to avoid injury as a result of contact
with the heat exchanger fins and sheet metal
parts.
14) Remove the screws of the guard holder and
bottom plate. (M4×10,2) (Fig. 16-6)
15) Replace the heat exchanger assembly.
2. Heat exchanger assembly installation
1) Install the assembly by following the procedure or
its removal in reverse.
Procedure
171
Remarks
Condenser coupling
plate screws (18 positions)
(Fig. 16-5)
Heat exchanger assembly
Guard holder
Bottom plate
Screws (2 positions)
(Fig. 16-6)
Screws (2 positions)