Table of Contents
Advertisement
ASSEMBLY
• To hire an authorized service technician
to assemble your exercise equipment, call
1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
1. With the help of a second person, carefully
tip the treadmill onto its side. Then, unfold
the Frame (51) away from the Left and Right
Uprights (53, 54).
Next, orient the Base (52) as shown. Attach the
Base to the Left and Right Uprights (53, 54)
with four M10 x 58mm Bolts (2) and four M10
Nuts (73); start all four Nuts, and then tighten
them.
With the help of a second person, carefully tip
the treadmill so that the Base (52) is flat on the
floor.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• To identify small parts, see page 6.
• Assembly requires the following tools:
the included hex keys
one adjustable wrench
one Phillips screwdriver
needlenose pliers
To avoid damaging parts, do not use power tools.
1
51
2
7
2
54
73
2
53
73
52
Advertisement
Table of Contents
