ICON Health & Fitness Weslo Crosswalk 5.2t User Manual page 9

4. With the help of a second person, hold the con-
sole assembly (A) near the Right Upright (54).
See the inset drawing. Connect the Wire
Harness (39) to the console wire (C). The con-
nectors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
If there is a wire tie on the Wire Harness (39),
remove the wire tie. Then, insert the connectors
and the excess wire downward into the Right
Upright (54).
5. Set the console assembly (A) on the Left and
Right Uprights (53, 54). Make sure that no
wires are pinched. Start four M8 x 15mm
Bolts (8) with four M8 Star Washers (5) into the
Uprights as shown; do not tighten the Bolts
yet.
6. Start an M8 x 15mm Bolt (8) with an M8 Star
Washer (5) into each Upright (53, 54).
Then, firmly tighten all six M8 x 15mm
Bolts (8).
4
39
C
54
5
5
54
6
8
5
53
8
9
A
C
39
A
8 8
5
53
8
54
8 5