Table of Contents
Advertisement
Quick Links
www.proform.com
USER'S MANUAL
Model No. PFTL99909.2
Serial No.
Write the serial number in the space
above for future reference.
Serial
Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
1-888-533-1333
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness PRO-FORM 590 LT
Summary of Contents for ICON Health & Fitness PRO-FORM 590 LT
- Page 1 www.proform.com USER'S MANUAL Model No. PFTL99909.2 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 DANGER: 19. Never leave the treadmill unattended while it Always unplug the power is running. Always remove the key, unplug cord immediately after use, before cleaning the the power cord, and switch the reset/off cir- treadmill, and before performing the mainte- cuit breaker to the off position when the nance and adjustment procedures described in treadmill is not in use.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new PROFORM 590 LT ing this manual, please see the front cover of this man- ® treadmill. The 590 LT treadmill offers a selection of fea- ual. To help us assist you, note the product model tures designed to make your workouts at home more number and serial number before contacting us. -
Page 6: Assembly
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. - Page 7 1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) Hole and the shipping bracket (B).
- Page 8 3. Attach a Wheel (95) to the Base (99) with an M10 x 50mm Bolt (26) and an M10 Locknut (36). Do not overtighten the Locknut; the Wheel must turn freely. 4. Identify the Right Upright (80) and the Right Upright Spacer (90), which are marked with Wire “Right”...
- Page 9 6. Press a Base Cap (91) into the Base (99). 7. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B).
- Page 10 9. Press a Base Cap (91) into the Base (99). With the help of a second person, tip the treadmill so that the Base (99) is flat on the floor. 10. Remove the Resistance Knob (88) from a resis- tance mechanism. Make sure that the 3/8" x 4 3/4"...
- Page 11 11. Insert the end of a Crosswalk Arm (82) into the hole in the top of a resistance mechanism. Make sure that the bend in the Crosswalk Arm is positioned as shown. Tighten an M4.2 x 19mm Screw (1) into the re- Bend sistance mechanism and Crosswalk Arm (82) from the direction shown.
- Page 12 13. Attach the Left Handrail (21) to the console as- sembly with three M4.2 x 19mm Screws (1). Start all three Screws before tightening any of them; do not overtighten the Screws. Console Assembly 14. Have a second person hold the console assem- bly near the Right Upright (80).
- Page 13 15. Partially tighten two M8 x 25mm Bolts (4) with two M8 Star Washers (9) into the Left Upright (79) and the Left Handrail (21); do not fully tighten the Bolts yet. Next, partially tighten two M8 x 25mm Bolts (4) with two M8 Star Washers (9) into the Right Upright (80) and the Right Handrail (100).
-
Page 14: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with high- performance lubricant. - Page 15 CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE To turn on the power, see page 16. To use the man- ual mode, see page 16. To use a preset workout, see page 18. To use the information mode, see page 19. The treadmill console offers a selection of features designed to make your workouts more effective and IMPORTANT: If there is a sheet of clear plastic on...
- Page 16 HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to To start the walking belt, press the Start button, the cold temperatures, allow it to warm to room tem- Speed increase button, or one of the ten numbered perature before turning on the power.
- Page 17 The lower left display To measure your heart rate, stand can show the elapsed on the foot rails time and the distance that you have walked and place your or run during your hands on the Metal Contacts workout. Each time you metal contacts—...
- Page 18 HOW TO USE A PRESET WORKOUT and/or incline setting will flash in the display to alert you. The speed and/or incline will then automati- 1. Insert the key into the console. cally adjust to the new speed and/or incline setting. See HOW TO TURN ON THE POWER on page If you have selected a crosswalk workout, you will be prompted to use the crosswalk arms.
- Page 19 THE INFORMATION MODE HOW TO USE THE CROSSWALK ARMS The console features an information mode that keeps As you walk on the treadmill, you can hold the track of treadmill usage information and allows you to handrails or use the crosswalk arms. To exercise your select a unit of measurement for the console.
-
Page 20: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. - Page 21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be nec- essary to push the frame forward as you pull the knob to Frame the left.
-
Page 22: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 23 Remove the three M4.2 x 19mm Screws (1) and carefully pivot the Motor Hood (63) off. Locate the Reed Switch (69) and the Magnet (48) on the left side of the Pulley (52). Turn the Pulley until the Magnet is aligned with the Reed Switch. 1/8 in.
- Page 24 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn;...
-
Page 25: Exercise Guidelines
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 26: Part List
PART LIST—Model No. PFTL99909.2 R1209A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description M4.2 x 19mm Screw Walking Platform M4.2 x 25mm Tek Screw Drive Roller/Pulley 3/8"... - Page 27 Key No. Qty. Description Key No. Qty. Description Lift Motor Wire Drive Motor Bracket Handrail Cap 8" Cable Tie Console Base M4.2 x 10mm Screw Book Holder M8 Nut Fan Grill Foot Rail Decal Fan Housing/Fan – 12" Blue Wire, 2F 7 1/2"...
-
Page 28: Exploded Drawing
EXPLODED DRAWING A—Model No. PFTL99909.2 R1209A... - Page 29 EXPLODED DRAWING B—Model No. PFTL99909.2 R1209A...
- Page 30 EXPLODED DRAWING C—Model No. PFTL99909.2 R1209A...
- Page 31 EXPLODED DRAWING D—Model No. PFTL99909.2 R1209A...
-
Page 32: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...