Table of Contents
Advertisement
b. Push and hold the metal tab under the internal speaker and slide the internal speaker downward to
remove it from the chassis.
Figure 121. Removing the internal speaker
4. To install the internal speaker, do the following:
a. Position the new internal speaker toward the four metal clips and slide the internal speaker upward
until it is secured in place.
Figure 122. Installing the internal speaker
b. Connect the internal-speaker cable to the internal-speaker connector on the system board. See
"Parts on the system board" on page 38.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 183.
Wi-Fi units
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
158
P330 Hardware Maintenance Manual
Advertisement
Table of Contents
