Lenovo 30C50064IX Hardware Maintenance Manual page 145

c. Pull the handle of the plastic 3.5-inch storage-drive bracket to remove the storage drive from the
type-1 storage-drive cage.
Figure 89. Removing the 3.5-inch storage drive
d. Flex the sides of the bracket to remove the storage drive from the bracket.
4. To install a 3.5-inch storage drive in the type-1 storage-drive cage, do the following:
a. To install a new storage drive into the bracket, flex the bracket and align pin
4 on the bracket with the corresponding holes in the storage drive. Do not touch the circuit board
on the storage drive.
Figure 90. Installing the storage drive into the bracket
1
, pin
.
Chapter 9 Hardware removal and installation
2 3
, pin , and pin
5
137