Table of Contents
Advertisement
e. Install the storage converter with the bracket into the enclosure from the rear until the drive snaps
into position.
Figure 72. Installing the storage converter with the bracket into the enclosure
7. Pivot the rear cover of the enclosure inward until you hear a click. The rear cover is secured in place.
Figure 73. Pivoting the rear cover inward
8. Connect the signal cable and the power cable to the storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 183.
Coin-cell battery
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Your computer has a special type of memory that maintains the date, time, and settings for built-in features,
such as parallel-connector assignments (configuration). A coin-cell battery keeps this information active
when you turn off the computer.
126
P330 Hardware Maintenance Manual
Advertisement
Table of Contents
