Table of Contents
Advertisement
M.2 solid-state drive in an M.2 solid-state drive PCIe adapter
To remove or install the M.2 solid-state drive in the M.2 solid-state drive PCIe adapter, do the following:
1. Prepare your computer. See "Preparing your computer" on page 96.
2. To remove the M.2 solid-state drive in the M.2 solid-state drive PCIe adapter, do the following:
a. Locate and remove the M.2 solid-state drive adapter from the PCIe card slot. See "PCIe card" on
page 101.
b. The heat sink is secured by two mounting studs. Pinch the clips of the studs inward
studs upward
2
3
.
Figure 34. Removing the heat sink from the M.2 solid-state drive adapter
c. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch
outward to release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of the M.2
slot.
Figure 35. Removing the M.2 solid-state drive
3. To install the M.2 solid-state drive, do the following:
108
P330 Hardware Maintenance Manual
to release the heat sink. Then, lift the heat sink off the M.2 solid-state drive adapter
1
and push the
Advertisement
Table of Contents
