Xerox DocuMate 3640 User Manual page 48

• Invert Image—Only available for Black&White Mode, this option reverses the black and whites of
an image.
• Duplex—Scan both sides of the page. If this option is not selected, the scanner will scan the face-
up side of the page only.
The Simplex and Duplex buttons on the scanner take precedence over the One Touch settings. In
other words, if the LED number on the scanner is configured to scan as Duplex, but you press the
Simplex button, the scanner scans in Simplex, and vice versa.
Color Filter—Color filter is the ability of your scanner to automatically remove a color from a
•
scanned image. For example, if you are scanning a letter with a red watermark, you can choose to
filter out the red so the scanned letter just shows the text and not the red watermark. Color filter
applies to Black & White or Grayscale scanning modes.
• Double-Feed Detection—Selecting this option turns on the scanner hardware feature that detects
when multiple pages feed through the scanner at one time.
Abort—scanning stops and all pages scanned in this batch, up to this point, will be deleted.
Prompt—you will be prompted to remove the pages in the ADF, restack the remaining pages and
continue scanning. All pages scanned before and after the double page feed are saved.
If you are finished making changes to the configuration, click on OK to save the settings and close the
window.
Original Image
The original with a red
watermark over black text.
Inverted Image
The scanned item with the
red filtered out.
Scanning From One Touch
DocuMate 3640 35
User's Guide