Scanner; Auto Width Detection - Xerox Synergix 8825 Supplementary Manual

Scanner

When using a scanner, the title block location selection (upper left, upper
right, lower left, and lower right) is as you would view the document to read it
(Figure 10). Some scanners provide a label (Figure 11) that indicates the
title block positions with the image in the face down position. This is done to
help the operator locate the title block with the document in the scan
position.
If a document has to be rotated to fit it into the scanner, the title block
location selection is still the original location as you would read the
document.
Note: When using the XES Synergix Digital Solution, the Auto Rotation
feature must be enabled, and the Output Format, Preset should be
used to match the output print size to the size of the document being
scanned.
UL UR
LL LR
Figure 10. Viewed as Read
(Image Up)
XES Synergix 8825/8830/8855 Digital Solution Folding Supplement
Title Block
UR UL
Scan Direction
LL LR
Figure 11. As Scanned
(Image down)

AUTO WIDTH DETECTION

If scanned documents are not being folded with the title blocked positioned
where it is visible, a possibility may be that Auto Width feature is not
functioning correctly. When using the XES Synergix Digital Solution, refer to
the scanner customer documentation, Cleaning and Maintenance.
Refer to the scanner customer documentation for any additional information
regarding the scanning of a document.
7