Selecting The Title Block Location; Workstation - Xerox Synergix 8825 Supplementary Manual

Selecting the Title Block Location

Workstation

Typically, the title block on engineering drawings is positioned in the lower
right corner as viewed on the workstation. However, as mentioned earlier,
the drawing program and/or the print driver/client tool program may interpret
the title block as being in a different location. Therefore, the AccXES
controller software provides a selection on the drivers that allows the user to
indicate the location of the title block. Figures 7, 8, and 9 show the driver
Finishing windows and the associated Title Block selection for the different
client tools. With this information the AccXES controller will, in most cases,
position the title block so that it will be visible on the folded copy.
Figure 8. WebPMT Finishing Window
Figure 9. Win 95/98 and NT 4.0/2000 Finishing Window
Figure 7. AccXES Client Tool Finishing Window
XES Synergix 8825/8830/8855 Digital Solution Folding Supplement 5