Printing Or Deleting Personal Saved Jobs - Xerox Phaser 8560 Advanced Features Manual

Printing or Deleting Personal Saved Jobs

To print or delete a personal saved print job, select the job name on the control panel:
1.
Select Walk-Up Features
2.
Select
Personal Saved Jobs
3.
Select your job name, and then press the OK button.
4.
Scroll to the correct number for the first digit of the numeric password, and then press the
OK button to accept that digit.
5.
Repeat Step 4 for the second, third, and fourth digits.
Note: If you enter less than four digits in the driver's Password field, enter zeros before
your password so that there are four digits displayed on the control panel. For example, if
you entered 222 in the driver, enter
return to a previous digit.
6.
Select the desired job, and then press the OK button.
7.
Select Print and Save
, and then press the OK button.
, and then press the OK button.
on the control panel. Use the Back button to
0222
or Delete , and then press the OK button to print or delete the job.
Phaser® 8560/8860 Printer
1-25
Printing Special Job Types