Printer Settings; Printer Control Settings - Xerox Phaser 8560 Advanced Features Manual

Printer Settings

This section includes:
■

Printer Control Settings

Paper Handling Settings
■
Printer Control Settings
This section includes:
■ Setting the Control Panel Language
■ Setting Control Panel Accessibility Behavior
■ Setting the Printer Date and Time
■ Controlling Startup Page Printing
■ Changing the Power Saver Timeout
■ Changing Intelligent Ready Mode
■ Viewing Supply Usage Information
Setting the Control Panel Language
To select the default control panel language, use one of the following options:
■ The printer's control panel
CentreWare IS
■
Using the Control Panel
To select the default language on the control panel:
1.
Select
Printer Setup
2.
Select
Control Panel Setup
3.
Select , and then press the OK button.
Language
4.
Select the desired language, and then press the OK button.
Using CentreWare IS
To change the default control panel language using CentreWare IS:
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field.
3. Click Properties.
4. Select the General folder on the left navigation panel, and then select Printer Defaults.
5. In the User Preferences area, select the language from the Set Control Panel Language
drop-down list.
6. Click the Save Changes button at the bottom of the screen.
on page 4-2
on page 4-9
on page 4-2
on page 4-4
on page 4-5
on page 4-6
on page 4-7
on page 4-8
, and then press the OK button.
, and then press the OK button.
Phaser® 8560/8860 Printer
4-2
on page 4-3
Printer Settings