General Information; Important - Atom HSP588 Instruction, Use And Maintenance Manual

HSP588

1 General information

1.1 Important

This travelling head press can be used to cut natural or synthetic leather/hide, cloth, cardboard, etc. No
metallic materials or materials having metals inside, as well as materials which could be prejudicial to
operator's health (i.e. asbestos) should be cut.
The machine must not be used in an explosive environment or to cut materials with hazard of explosion.
The machine must be used by a SINGLE operator.
The pictures in this instruction manual show the HSP 588 travelling head press without accessories (see
pertinent paragraph).
This machine is delivered with a kit of wrenches and a series of components of the rear table and its
pertinent safety guards, to be assembled (for assembling see pertinent paragraph).
Any reproduction of this catalogue is absolutely prohibited.
ATOM S.p.a. expect you may utilize the product at the best with your full satisfaction.
For any doubt or further advice, do not hesitate to contact ATOM S.p.a.
Atom SpA
Via Morosini, 6 - 27029 Vigevano ( Italia )
Tel. +39.0381.3021 - Fax +39.0381.344303
www.atom.it - info@atom.it
Service technical support:
Atom SpA
Via Morosini, 6 - 27029 Vigevano ( Italia )
Tel. 800 – 256525
Use and maintenance manual pag. 7