Table of Contents
Advertisement
Key
Screen
No.
display
Short time
❺
Z
Long time
Short time
❻
Z
Long time
Short time
❼
Z
Long time
Short time
❽
Z
Long time
Short time
❾
Z
Long time
Short time
Z
Long time
Short time
Z
Long time
Short time
Z
Long time
Short time
Z
Long time
Short time
I
Short time
J
Short time
K
Short time
L
Short time
M
Short time
N - Q
Short time
Y
Long time
How long the
key must be
pressed
Used to decrease the maximum sewing speed
Continuous input is possible
(by keeping the key held pressed for three seconds or more)
This key is used to add one stitch to the number of reverse feed
stitches at the beginning and end of sewing (process A).
Continuous input is possible
This key is used to subtract one stitch from the number of reverse
feed stitches at the beginning and end of sewing (process A).
Continuous input is possible
This key is used to add one stitch to the number of reverse feed
stitches at the beginning and end of sewing (process B).
Continuous input is possible
This key is used to subtract one stitch from the number of reverse
feed stitches at the beginning and end of sewing (process B).
Continuous input is possible
This key is used to add one stitch to the number of reverse feed
stitches at the beginning and end of sewing (process C).
Continuous input is possible
This key is used to subtract one stitch from the number of reverse
feed stitches at the beginning and end of sewing (process C).
Continuous input is possible
This key is used to add one stitch to the number of reverse feed
stitches at the beginning and end of sewing (process D).
Continuous input is possible
This key is used to subtract one stitch from the number of reverse
feed stitches at the beginning and end of sewing (process D).
Continuous input is possible
Used to changing over the automatic reverse feed stitching at the
beginning of sewing to: Reverse feed stitching / Double reverse feed
stitching / Disable
Used to change over the automatic reverse feed stitching at the end
of sewing to: Reverse feed stitching / Double reverse feed stitching /
Disable
Used to set the type of stitching to free stitching
This key is used to set the sewing mode to the constant-dimension
sewing (straight line).
Used to set the type of stitching to overlapped stitching
Used to change over the constant-dimension stitching pattern
This key is used to change over enable/disable of the needle draw-
out function.
This key is used to initialize the function setting data. (Refer to P.55.)
Function
– 31 –
Advertisement
Table of Contents
