Table of Contents
Advertisement
No.
Item
P77
Back-tack solenoid
The BT solenoid ON timing at the end of sewing is
ON timing at the
set with this function setting item.
end of sewing
* This parameter applies only to the free stitching.
P113 Bobbin counter
The largest value that the bobbin counter can count
is set with this function setting item.
P116 Function of prohib-
This item is used to set the compensating stitch func-
iting the correction
tion activated by turning the handwheel by hand after
operation after turn-
the completion of constant-dimension sewing.
ing the handwheel
0 : Correction sewing function is disabled
by hand
1 : Correction sewing function is enabled
* This parameter is enabled in the case "P11 Selec-
P117 Thread trimming
The thread trimming operation after turning the pulley
operation after turn-
by hand to move the sewing machine from the upper
ing the handwheel
and lower positions is set with this function setting
by hand
item.
0 : Thread trimming operation is not carried out after
1 : Thread trimming operation is carried out after turn-
P118 Setting of the nee-
The operation of the needle up/down switch after
dle up/down switch
thread trimming is set with this function setting item.
operation after
0 : Needle up/down operation is carried out
thread trimming
1 : One-stitch operation is carried out
P136 Selection of the
Operation of the presser foot when the power is
presser foot opera-
turned ON is selected with this function setting item.
tion when the power
0 : The presser foot does not operate (It operates
is turned ON
1 : The presser foot goes up after automatically re-
2 : The presser foot comes down after automatically
P138 Function of pedal
Pedal curve is selected.
curve selection
(Improving pedal inching operation)
P139 Function of reverse
The function activated when the reverse feed stitch-
feed stitching on
ing on the way switch is pressed is selected with this
the way
function setting item.
0 : Normal back-tack function
1 : Function of reverse feed stitching on the way is
2 : Condensation stitching (without reverse feed)
P140 Number of stitches
The number of stitches of reverse feed stitching on
of reverse feed
the way is set with this function setting item.
stitching on the way
P141 Condition to be
The condition to be satisfied to enable the reverse
satisfied to enable
feed stitching switch while the sewing machine is at
the reverse feed
rest is set with this function setting item.
stitching on the way
0 : Disabled while the sewing machine is at rest
while the sewing
1 : Enabled while the sewing machine is at rest
machine is at rest
P142 Thread trimming
Automatic thread trimming operation after performing
function after
the reverse feed stitching on the way is set with this
performing reverse
function setting item.
feed stitching on
0 : Automatic thread trimming is not performed after
the way
1 : Automatic thread trimming is performed after the
2 : The sewing machine stops with its needle up after
Description
tion of operation of BTSW" is set to "1: Needle up/
down correction switch".
turning the pulley by hand.
ing the pulley by hand
when the back part of the pedal is depressed.)
trieving the origin
retrieving the origin
enabled (In the case the function for reverse feed
stitching at midpoint of sewing is enabled, P142
function can be used.)
function
the completion of reverse feed stitching on the
way
completion of reverse feed stitching on the way
the completion of the reverse feed stitching on the
way without performing thread trimming.
Setting level
With a
thread
trimmer
U
U
U
U
U
U
U
U
U
U
U
– 43 –
Setting range
Default
Without
With a
Without
With a
a thread
thread
a thread
thread
trimmer
trimmer
trimmer
trimmer
50-330
---
0-
---
0
9999
---
0-1
---
0
---
0-1
---
1
---
0-1
---
0
---
0-2
---
0
0-2
0-2
1-19
0-1
---
0-2
---
0
Without
a thread
trimmer
150
---
---
---
---
---
0
0
4
0
---
Advertisement
Table of Contents
