Dns Setup Using Centreware Internet Services; Dynamic Domain Name Service (Ddns) - Xerox Phaser 8200 Networking Setup Manual

DNS setup using CentreWare Internet Services

After setting the printer's IP address, you can set up the printer for DNS using CentreWare IS.
1. Connect to the printer via CentreWare IS by entering your printer's IP address into your browser.
2. On the right side of the main CentreWare IS page, click Properties.
3. In the Protocols group, click TCP/IP.
4. Under DNS Settings, select ON for Domain Name Service Resolver.
5.
Enter the following information:
Primary Name Server IP Address (required)
I
Second Name Server IP Address (optional)
I
6. When you are finished entering the settings, click Save Changes at the bottom of the screen.

Dynamic Domain Name Service (DDNS)

This printer supports Dynamic DNS through DHCP. You must have DHCP enabled for DDNS to
function. To enable DHCP:
1. Connect to the printer via CentreWare IS by entering your printer's IP address into your browser.
2. On the right side of the printer's main CentreWare IS page, click Properties.
3. On the left side under Protocols, click TCP/IP.
4.
Set the BOOTP/DHCP option to ON.
To enable DDNS, enter the following DDNS/WINS settings information:
DDNS - Set to ON.
I
Release Host Name - Set to NO.
I
DDNS/WINS Name - Use the default name provided by Xerox or enter another name.
I
Primary Name Server IP Address (optional)
I
Second Name Server IP Address (optional)
I
5. When you are finished entering the settings, click Save Changes at the bottom of the screen.
Phaser® 8200 Color Printer
IP Address
4