Sending Reports Via Email - Xerox Phaser 8200 Networking Setup Manual

Using CentreWare IS
1. Connect to the printer via CentreWare IS by entering your printer's IP address into your browser.
2. On the right side of the page, click Jobs.
3. On the left side of the page, click Usage Profile.
4. Click Print Usage Profile Report to print a full report with empty fields omitted.

Sending reports via email

From the front panel
Note
To send Usage Profile reports via email, the printer must be properly set up via
CentreWare IS.
1. With highlighted, press the OK key.
Menus
2.
Scroll to
Support Menu
3.
Press the OK key.
4. Scroll to
Usage Profile Menu
5. Press the OK key.
6. Scroll to
Email Full Report
Scroll Down key.
7. Press the OK key.
8. To exit the menu system, scroll to
Using CentreWare IS
Note
To send Usage Profile reports via email, the MaiLinX must be properly set up via
CentreWare IS.
1.
Connect to the printer via CentreWare IS by entering your printer's IP address into your browser.
2.
On the right side of the main page, click Jobs.
3. On the left side of the page, click Usage Profile.
4. Enter the desired email address in the Send to Specific Address field.
5. Click Send Usage Profile Report.
Phaser® 8200 Color Printer
by pressing the Scroll Up or Scroll Down key.
by pressing the Scroll Up or Scroll Down key.
or
Email Job Report
and press the OK key.
Exit
Printer Management
by pressing the Scroll Up or
11